# Copyright 1999-2024 Gentoo Authors # Distributed under the terms of the GNU General Public License v2 EAPI=8 PYTHON_COMPAT=( python3_{10,11,12} ) PYTHON_REQ_USE="threads(+),xml(+)" inherit autotools flag-o-matic linux-info python-single-r1 readme.gentoo-r1 udev DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools" HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing" SRC_URI="https://downloads.sourceforge.net/project/${PN}/${PN}/${PV}/${P}.tar.gz https://dev.gentoo.org/~billie/distfiles/${PN}-3.24.4-patches-1.tar.xz" LICENSE="GPL-2" SLOT="0" KEYWORDS="amd64 arm ~arm64 ppc ppc64 x86" IUSE="doc fax +hpcups hpijs kde libnotify libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X" COMMON_DEPEND=" net-print/cups media-libs/libjpeg-turbo:0 hpijs? ( net-print/cups-filters[foomatic] ) !libusb0? ( virtual/libusb:1 ) libusb0? ( virtual/libusb:0 ) ${PYTHON_DEPS} !minimal? ( sys-apps/dbus scanner? ( media-gfx/sane-backends ) snmp? ( dev-libs/openssl:0= net-analyzer/net-snmp:=[${PYTHON_SINGLE_USEDEP}] net-dns/avahi[dbus,python,${PYTHON_SINGLE_USEDEP}] ) ) " BDEPEND=" virtual/pkgconfig " DEPEND=" ${COMMON_DEPEND} " RDEPEND=" ${COMMON_DEPEND} app-text/ghostscript-gpl !minimal? ( $(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_USEDEP}]' 'python3*') kernel_linux? ( virtual/udev ) $(python_gen_cond_dep ' >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}] dev-python/distro[${PYTHON_USEDEP}] fax? ( dev-python/reportlab[${PYTHON_USEDEP}] ) qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_USEDEP}] libnotify? ( dev-python/notify2[${PYTHON_USEDEP}] ) ) scanner? ( >=dev-python/reportlab-3.2[${PYTHON_USEDEP}] >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}] X? ( || ( kde? ( kde-misc/skanlite ) media-gfx/xsane media-gfx/sane-frontends ) ) ) ') ) policykit? ( sys-auth/polkit ) " REQUIRED_USE="${PYTHON_REQUIRED_USE}" PATCHES=( "${WORKDIR}/patches" ) CONFIG_CHECK="~PARPORT ~PPDEV" ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)." #DISABLE_AUTOFORMATTING="yes" DOC_CONTENTS=" For more information on setting up your printer please take a look at the hplip section of the gentoo printing guide: https://wiki.gentoo.org/wiki/Printing " pkg_setup() { python-single-r1_pkg_setup use scanner && ! use X && ewarn "You need USE=X for the scanner GUI." use parport && linux-info_pkg_setup if use minimal ; then ewarn "Installing driver portions only, make sure you know what you are doing." ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver" ewarn "is installed. If both USE flags are set hpijs overrides hpcups." ewarn "This also disables fax, network, scanner and gui support!" fi if ! use hpcups && ! use hpijs ; then ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver," ewarn "which is probably not what you want." ewarn "You will almost certainly not be able to print." fi } src_prepare() { default python_fix_shebang . # Make desktop files follow the specification # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680 # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324 sed -i -e '/^Categories=/s/Application;//' \ -e '/^Encoding=.*/d' hplip.desktop.in || die sed -i -e '/^Categories=/s/Application;//' \ -e '/^Version=.*/d' \ -e '/^Comment=.*/d' hplip-systray.desktop.in || die # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725 # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847, # https://bugs.launchpad.net/hplip/+bug/500086 local udevdir=$(get_udevdir) sed -i -e "s|/etc/udev|${udevdir}|g" \ $(find . -type f -exec grep -l /etc/udev {} +) || die # Force recognition of Gentoo distro by hp-check sed -i \ -e "s:file('/etc/issue', 'r').read():'Gentoo':" \ installer/core_install.py || die eautoreconf } src_configure() { # -Werror=lto-type-mismatch # https://bugs.gentoo.org/861851 # https://bugs.launchpad.net/hplip/+bug/2055371 filter-lto local drv_build minimal_build if use hpcups ; then drv_build="$(use_enable hpcups hpcups-install)" if use static-ppds ; then drv_build="${drv_build} --enable-cups-ppd-install" drv_build="${drv_build} --disable-cups-drv-install" else drv_build="${drv_build} --enable-cups-drv-install" drv_build="${drv_build} --disable-cups-ppd-install" fi else drv_build="--disable-hpcups-install" drv_build="${drv_build} --disable-cups-drv-install" drv_build="${drv_build} --disable-cups-ppd-install" fi if use hpijs ; then drv_build="${drv_build} $(use_enable hpijs hpijs-install)" if use static-ppds ; then drv_build="${drv_build} --enable-foomatic-ppd-install" drv_build="${drv_build} --disable-foomatic-drv-install" else drv_build="${drv_build} --enable-foomatic-drv-install" drv_build="${drv_build} --disable-foomatic-ppd-install" fi else drv_build="${drv_build} --disable-hpijs-install" drv_build="${drv_build} --disable-foomatic-drv-install" drv_build="${drv_build} --disable-foomatic-ppd-install" fi if use minimal ; then if use hpijs ; then minimal_build="--enable-hpijs-only-build" else minimal_build="--disable-hpijs-only-build" fi if use hpcups ; then minimal_build="${minimal_build} --enable-hpcups-only-build" else minimal_build="${minimal_build} --disable-hpcups-only-build" fi minimal_build="${minimal_build} --disable-dbus-build" minimal_build="${minimal_build} --disable-fax-build" minimal_build="${minimal_build} --disable-network-build" minimal_build="${minimal_build} --disable-scan-build" minimal_build="${minimal_build} --disable-gui-build" else minimal_build="${minimal_build} --enable-dbus-build" if use fax ; then minimal_build="${minimal_build} --enable-fax-build" else minimal_build="${minimal_build} --disable-fax-build" fi if use snmp ; then minimal_build="${minimal_build} --enable-network-build" else minimal_build="${minimal_build} --disable-network-build" fi if use scanner ; then minimal_build="${minimal_build} --enable-scan-build" else minimal_build="${minimal_build} --disable-scan-build" fi if use qt5 ; then minimal_build="${minimal_build} --enable-qt5" minimal_build="${minimal_build} --enable-gui-build" else minimal_build="${minimal_build} --disable-gui-build" minimal_build="${minimal_build} --disable-qt5" fi fi # disable class driver for now econf \ --disable-class-driver \ --disable-cups11-build \ --disable-foomatic-rip-hplip-install \ --disable-imageProcessor-build \ --disable-lite-build \ --disable-shadow-build \ --disable-qt3 \ --disable-qt4 \ --disable-udev_sysfs_rules \ --with-cupsbackenddir=$(cups-config --serverbin)/backend \ --with-cupsfilterdir=$(cups-config --serverbin)/filter \ --with-docdir=/usr/share/doc/${PF} \ --with-htmldir=/usr/share/doc/${PF}/html \ --enable-hpps-install \ ${drv_build} \ ${minimal_build} \ $(use_enable doc doc-build) \ $(use_enable libusb0 libusb01_build) \ $(use_enable parport pp-build) \ $(use_enable policykit) # hpijs ppds are created at configure time but are not installed (3.17.11) # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip # The hpcups driver does not use foomatic-rip #local i #for i in ppd/hpijs/*.ppd.gz ; do # rm -f ${i}.temp || die # gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \ # gzip > ${i}.temp || die # mv ${i}.temp ${i} || die #done } src_install() { # Disable parallel install # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018 emake -j1 DESTDIR="${D}" install einstalldocs # default # Installed by sane-backends # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023 rm -f "${ED}"/etc/sane.d/dll.conf || die # Remove desktop and autostart files # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770 use qt5 || { rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg } rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die # Remove hal fdi files rm -rf "${ED}"/usr/share/hal || die find "${D}" -name '*.la' -delete || die python_optimize "${ED}"/usr/share/hplip readme.gentoo_create_doc } pkg_postinst() { udev_reload readme.gentoo_print_elog } pkg_postrm() { udev_reload }