# $NetBSD: rc.subr,v 1.100.4.1 2018/04/04 16:07:33 martin Exp $ # # Copyright (c) 1997-2011 The NetBSD Foundation, Inc. # All rights reserved. # # This code is derived from software contributed to The NetBSD Foundation # by Luke Mewburn. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # rc.subr # functions used by various rc scripts # : ${rcvar_manpage:='rc.conf(5)'} : ${RC_PID:=$$} ; export RC_PID nl=' ' # a literal newline # RC variables to clear on start. _env_clear_rc_vars=" RC_PID= _rc_pid= _rc_original_stdout_fd= _rc_original_stderr_fd= _rc_postprocessor_fd= " # # functions # --------- # # checkyesno var # Test $1 variable. # Return 0 if it's "yes" (et al), 1 if it's "no" (et al), 2 otherwise. # checkyesnox() { eval _value=\$${1} case $_value in # "yes", "true", "on", or "1" [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) return 0 ;; # "no", "false", "off", or "0" [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) return 1 ;; *) return 2 ;; esac } # # checkyesno var # Test $1 variable, and warn if not set to YES or NO. # Return 0 if it's "yes" (et al), nonzero otherwise. # checkyesno() { local var checkyesnox $1 var=$? [ $var = 0 -o $var = 1 ] && return $var warn "\$${1} is not set properly - see ${rcvar_manpage}." return 1 } # # yesno_to_truefalse var # Convert the value of a variable from any of the values # understood by checkyesno() to "true" or "false". # yesno_to_truefalse() { local var=$1 if checkyesno $var; then eval $var=true return 0 else eval $var=false return 1 fi } # # reverse_list list # print the list in reverse order # reverse_list() { _revlist= for _revfile; do _revlist="$_revfile $_revlist" done echo $_revlist } # # If booting directly to multiuser, send SIGTERM to # the parent (/etc/rc) to abort the boot. # Otherwise just exit. # stop_boot() { if [ "$autoboot" = yes ]; then echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!" kill -TERM ${RC_PID} fi exit 1 } # # mount_critical_filesystems type # Go through the list of critical file systems as provided in # the rc.conf(5) variable $critical_filesystems_${type}, checking # each one to see if it is mounted, and if it is not, mounting it. # It's not an error if file systems prefixed with "OPTIONAL:" # are not mentioned in /etc/fstab. # mount_critical_filesystems() { eval _fslist=\$critical_filesystems_${1} _mountcrit_es=0 for _fs in $_fslist; do _optional=false case "$_fs" in OPTIONAL:*) _optional=true _fs="${_fs#*:}" ;; esac _ismounted=false # look for a line like "${fs} on * type *" # or "* on ${fs} type *" in the output from mount. case "${nl}$( mount )${nl}" in *" on ${_fs} type "*) _ismounted=true ;; *"${nl}${_fs} on "*) _ismounted=true ;; esac if $_ismounted; then print_rc_metadata \ "note:File system ${_fs} was already mounted" else _mount_output=$( mount $_fs 2>&1 ) _mount_es=$? case "$_mount_output" in *"${nl}"*) # multiple lines can't be good, # not even if $_optional is true ;; *[uU]'nknown special file or file system'*) if $_optional; then # ignore this error print_rc_metadata \ "note:Optional file system ${_fs} is not present" _mount_es=0 _mount_output="" fi ;; esac if [ -n "$_mount_output" ]; then printf >&2 "%s\n" "$_mount_output" fi if [ "$_mount_es" != 0 ]; then _mountcrit_es="$_mount_es" fi fi done return $_mountcrit_es } # # check_pidfile pidfile procname [interpreter] # Parses the first line of pidfile for a PID, and ensures # that the process is running and matches procname. # Prints the matching PID upon success, nothing otherwise. # interpreter is optional; see _find_processes() for details. # check_pidfile() { _pidfile=$1 _procname=$2 _interpreter=$3 if [ -z "$_pidfile" -o -z "$_procname" ]; then err 3 'USAGE: check_pidfile pidfile procname [interpreter]' fi if [ ! -f $_pidfile ]; then return fi read _pid _junk < $_pidfile if [ -z "$_pid" ]; then return fi _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" } # # check_process procname [interpreter] # Ensures that a process (or processes) named procname is running. # Prints a list of matching PIDs. # interpreter is optional; see _find_processes() for details. # check_process() { _procname=$1 _interpreter=$2 if [ -z "$_procname" ]; then err 3 'USAGE: check_process procname [interpreter]' fi _find_processes $_procname ${_interpreter:-.} '-A' } # # _find_processes procname interpreter psargs # Search for procname in the output of ps generated by psargs. # Prints the PIDs of any matching processes, space separated. # # If interpreter == ".", check the following variations of procname # against the first word of each command: # procname # `basename procname` # `basename procname` + ":" # "(" + `basename procname` + ")" # # If interpreter != ".", read the first line of procname, remove the # leading #!, normalise whitespace, append procname, and attempt to # match that against each command, either as is, or with extra words # at the end. As an alternative, to deal with interpreted daemons # using perl, the basename of the interpreter plus a colon is also # tried as the prefix to procname. # _find_processes() { if [ $# -ne 3 ]; then err 3 'USAGE: _find_processes procname interpreter psargs' fi _procname=$1 _interpreter=$2 _psargs=$3 _pref= _procnamebn=${_procname##*/} if [ $_interpreter != "." ]; then # an interpreted script read _interp < ${_chroot:-}/$_procname # read interpreter name _interp=${_interp#\#!} # strip #! set -- $_interp if [ $1 = "/usr/bin/env" ]; then shift set -- $(type $1) shift $(($# - 1)) _interp="${1##*/} $_procname" else _interp="$* $_procname" fi if [ $_interpreter != $1 ]; then warn "\$command_interpreter $_interpreter != $1" fi _interpbn=${1##*/} _fp_args='_argv' _fp_match='case "$_argv" in ${_interp}|"${_interp} "*|"${_interpbn}: "*${_procnamebn}*)' else # a normal daemon _fp_args='_arg0 _argv' _fp_match='case "$_arg0" in $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")' fi _proccheck=' ps -o "pid,args" '"$_psargs"' | while read _npid '"$_fp_args"'; do case "$_npid" in PID) continue ;; esac ; '"$_fp_match"' echo -n "$_pref$_npid" ; _pref=" " ;; esac done' #echo 1>&2 "proccheck is :$_proccheck:" eval $_proccheck } # # wait_for_pids pid [pid ...] # spins until none of the pids exist # wait_for_pids() { _list="$@" if [ -z "$_list" ]; then return fi _prefix= while true; do _nlist=""; for _j in $_list; do if kill -0 $_j 2>/dev/null; then _nlist="${_nlist}${_nlist:+ }$_j" fi done if [ -z "$_nlist" ]; then break fi if [ "$_list" != "$_nlist" ]; then _list=$_nlist echo -n ${_prefix:-"Waiting for PIDS: "}$_list _prefix=", " fi # We want this to be a tight loop for a fast exit sleep 0.05 done if [ -n "$_prefix" ]; then echo "." fi } # # run_rc_command argument [parameters] # Search for argument in the list of supported commands, which is: # "start stop restart rcvar status poll ${extra_commands}" # If there's a match, run ${argument}_cmd or the default method # (see below), and pass the optional list of parameters to it. # # If argument has a given prefix, then change the operation as follows: # Prefix Operation # ------ --------- # fast Skip the pid check, and set rc_fast=yes # force Set ${rcvar} to YES, and set rc_force=yes # one Set ${rcvar} to YES # # The following globals are used: # # Name Needed Purpose # ---- ------ ------- # name y Name of script. # # command n Full path to command. # Not needed if ${rc_arg}_cmd is set for # each keyword. # # command_args n Optional args/shell directives for command. # # command_interpreter n If not empty, command is interpreted, so # call check_{pidfile,process}() appropriately. # # extra_commands n List of extra commands supported. # # pidfile n If set, use check_pidfile $pidfile $command, # otherwise use check_process $command. # In either case, only check if $command is set. # # procname n Process name to check for instead of $command. # # rcvar n This is checked with checkyesno to determine # if the action should be run. # # ${name}_chroot n Directory to chroot to before running ${command} # Requires /usr to be mounted. # # ${name}_chdir n Directory to cd to before running ${command} # (if not using ${name}_chroot). # # ${name}_flags n Arguments to call ${command} with. # NOTE: $flags from the parent environment # can be used to override this. # # ${name}_env n Additional environment variable settings # for running ${command} # # ${name}_nice n Nice level to run ${command} at. # # ${name}_user n User to run ${command} as, using su(1) if not # using ${name}_chroot. # Requires /usr to be mounted. # # ${name}_group n Group to run chrooted ${command} as. # Requires /usr to be mounted. # # ${name}_groups n Comma separated list of supplementary groups # to run the chrooted ${command} with. # Requires /usr to be mounted. # # ${rc_arg}_cmd n If set, use this as the method when invoked; # Otherwise, use default command (see below) # # ${rc_arg}_precmd n If set, run just before performing the # ${rc_arg}_cmd method in the default # operation (i.e, after checking for required # bits and process (non)existence). # If this completes with a non-zero exit code, # don't run ${rc_arg}_cmd. # # ${rc_arg}_postcmd n If set, run just after performing the # ${rc_arg}_cmd method, if that method # returned a zero exit code. # # required_dirs n If set, check for the existence of the given # directories before running the default # (re)start command. # # required_files n If set, check for the readability of the given # files before running the default (re)start # command. # # required_vars n If set, perform checkyesno on each of the # listed variables before running the default # (re)start command. # # Default behaviour for a given argument, if no override method is # provided: # # Argument Default behaviour # -------- ----------------- # start if !running && checkyesno ${rcvar} # ${command} # # stop if ${pidfile} # rc_pid=$(check_pidfile $pidfile $command) # else # rc_pid=$(check_process $command) # kill $sig_stop $rc_pid # wait_for_pids $rc_pid # ($sig_stop defaults to TERM.) # # reload Similar to stop, except use $sig_reload instead, # and doesn't wait_for_pids. # $sig_reload defaults to HUP. # # restart Run `stop' then `start'. # # status Show if ${command} is running, etc. # # poll Wait for ${command} to exit. # # rcvar Display what rc.conf variable is used (if any). # # Variables available to methods, and after run_rc_command() has # completed: # # Variable Purpose # -------- ------- # rc_arg Argument to command, after fast/force/one processing # performed # # rc_flags Flags to start the default command with. # Defaults to ${name}_flags, unless overridden # by $flags from the environment. # This variable may be changed by the precmd method. # # rc_pid PID of command (if appropriate) # # rc_fast Not empty if "fast" was provided (q.v.) # # rc_force Not empty if "force" was provided (q.v.) # # run_rc_command() { rc_arg=$1 if [ -z "$name" ]; then err 3 'run_rc_command: $name is not set.' fi _rc_prefix= case "$rc_arg" in fast*) # "fast" prefix; don't check pid rc_arg=${rc_arg#fast} rc_fast=yes ;; force*) # "force" prefix; always run rc_force=yes _rc_prefix=force rc_arg=${rc_arg#${_rc_prefix}} if [ -n "${rcvar}" ]; then eval ${rcvar}=YES fi ;; one*) # "one" prefix; set ${rcvar}=yes _rc_prefix=one rc_arg=${rc_arg#${_rc_prefix}} if [ -n "${rcvar}" ]; then eval ${rcvar}=YES fi ;; esac _keywords="start stop restart rcvar" if [ -n "$extra_commands" ]; then _keywords="${_keywords} ${extra_commands}" fi rc_pid= _pidcmd= _procname=${procname:-${command}} # setup pid check command if not fast if [ -z "$rc_fast" -a -n "$_procname" ]; then if [ -n "$pidfile" ]; then _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' else _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' fi if [ -n "$_pidcmd" ]; then _keywords="${_keywords} status poll" fi fi if [ -z "$rc_arg" ]; then rc_usage "$_keywords" fi shift # remove $rc_arg from the positional parameters if [ -n "$flags" ]; then # allow override from environment rc_flags=$flags else eval rc_flags=\$${name}_flags fi eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ _nice=\$${name}_nice _user=\$${name}_user \ _group=\$${name}_group _groups=\$${name}_groups \ _env=\"\$${name}_env\" if [ -n "$_user" ]; then # unset $_user if running as that user if [ "$_user" = "$(id -un)" ]; then unset _user fi fi # if ${rcvar} is set, and $1 is not # "rcvar", then run # checkyesno ${rcvar} # and return if that failed or warn # user and exit when interactive # if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then if ! checkyesno ${rcvar}; then # check whether interactive or not if [ -n "$_run_rc_script" ]; then return 0 fi for _elem in $_keywords; do if [ "$_elem" = "$rc_arg" ]; then cat 1>&2 <&2 "$0: unknown directive '$rc_arg'." rc_usage "$_keywords" fi fi eval $_pidcmd # determine the pid if necessary for _elem in $_keywords; do if [ "$_elem" != "$rc_arg" ]; then continue fi # if there's a custom ${XXX_cmd}, # run that instead of the default # eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ _postcmd=\$${rc_arg}_postcmd if [ -n "$_cmd" ]; then # if the precmd failed and force # isn't set, exit # if ! eval $_precmd && [ -z "$rc_force" ]; then return 1 fi if ! eval $_cmd \"\${@}\" && [ -z "$rc_force" ]; then return 1 fi eval $_postcmd return 0 fi if [ ${#} -gt 0 ]; then err 1 "the $rc_arg command does not take any parameters" fi case "$rc_arg" in # default operations... status) if [ -n "$rc_pid" ]; then echo "${name} is running as pid $rc_pid." else echo "${name} is not running." return 1 fi ;; start) if [ -n "$rc_pid" ]; then echo 1>&2 "${name} already running? (pid=$rc_pid)." exit 1 fi if [ ! -x ${_chroot}${command} ]; then return 0 fi # check for required variables, # directories, and files # for _f in $required_vars; do if ! checkyesno $_f; then warn "\$${_f} is not enabled." if [ -z "$rc_force" ]; then return 1 fi fi done for _f in $required_dirs; do if [ ! -d "${_f}/." ]; then warn "${_f} is not a directory." if [ -z "$rc_force" ]; then return 1 fi fi done for _f in $required_files; do if [ ! -r "${_f}" ]; then warn "${_f} is not readable." if [ -z "$rc_force" ]; then return 1 fi fi done # if the precmd failed and force # isn't set, exit # if ! eval $_precmd && [ -z "$rc_force" ]; then return 1 fi # setup the command to run, and run it # echo "Starting ${name}." if [ -n "$_chroot" ]; then _doit="\ $_env_clear_rc_vars $_env \ ${_nice:+nice -n $_nice }\ chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ $_chroot $command $rc_flags $command_args" else _doit="\ ${_chdir:+cd $_chdir; }\ $_env_clear_rc_vars $_env \ ${_nice:+nice -n $_nice }\ $command $rc_flags $command_args" if [ -n "$_user" ]; then _doit="su -m $_user -c 'sh -c \"$_doit\"'" fi fi # if the cmd failed and force # isn't set, exit # if ! eval $_doit && [ -z "$rc_force" ]; then return 1 fi # finally, run postcmd # eval $_postcmd ;; stop) if [ -z "$rc_pid" ]; then if [ -n "$pidfile" ]; then echo 1>&2 \ "${name} not running? (check $pidfile)." else echo 1>&2 "${name} not running?" fi exit 1 fi # if the precmd failed and force # isn't set, exit # if ! eval $_precmd && [ -z "$rc_force" ]; then return 1 fi # send the signal to stop # echo "Stopping ${name}." _doit="kill -${sig_stop:-TERM} $rc_pid" if [ -n "$_user" ]; then _doit="su -m $_user -c 'sh -c \"$_doit\"'" fi # if the stop cmd failed and force # isn't set, exit # if ! eval $_doit && [ -z "$rc_force" ]; then return 1 fi # wait for the command to exit, # and run postcmd. wait_for_pids $rc_pid eval $_postcmd ;; reload) if [ -z "$rc_pid" ]; then if [ -n "$pidfile" ]; then echo 1>&2 \ "${name} not running? (check $pidfile)." else echo 1>&2 "${name} not running?" fi exit 1 fi echo "Reloading ${name} config files." if ! eval $_precmd && [ -z "$rc_force" ]; then return 1 fi _doit="kill -${sig_reload:-HUP} $rc_pid" if [ -n "$_user" ]; then _doit="su -m $_user -c 'sh -c \"$_doit\"'" fi if ! eval $_doit && [ -z "$rc_force" ]; then return 1 fi eval $_postcmd ;; restart) if ! eval $_precmd && [ -z "$rc_force" ]; then return 1 fi # prevent restart being called more # than once by any given script # if ${_rc_restart_done:-false}; then return 0 fi _rc_restart_done=true ( $0 ${_rc_prefix}stop ) $0 ${_rc_prefix}start eval $_postcmd ;; poll) if [ -n "$rc_pid" ]; then wait_for_pids $rc_pid fi ;; rcvar) echo "# $name" if [ -n "$rcvar" ]; then if checkyesno ${rcvar}; then echo "\$${rcvar}=YES" else echo "\$${rcvar}=NO" fi fi ;; *) rc_usage "$_keywords" ;; esac return 0 done echo 1>&2 "$0: unknown directive '$rc_arg'." rc_usage "$_keywords" exit 1 } # # _have_rc_postprocessor # Test whether the current script is running in a context that # was invoked from /etc/rc with a postprocessor. # # If the test fails, some variables may be unset to make # such tests more efficient in future. # _have_rc_postprocessor() { # Cheap tests that fd and pid are set, fd is writable. [ -n "${_rc_pid}" ] || { unset _rc_pid; return 1; } [ -n "${_rc_postprocessor_fd}" ] || { unset _rc_pid; return 1; } eval ": >&${_rc_postprocessor_fd}" 2>/dev/null \ || { unset _rc_pid; return 1; } return 0 } # # run_rc_script file arg # Start the script `file' with `arg', and correctly handle the # return value from the script. If `file' ends with `.sh', it's # sourced into the current environment. If `file' appears to be # a backup or scratch file, ignore it. Otherwise if it's # executable run as a child process. # # If `file' contains "KEYWORD: interactive" and if we are # running inside /etc/rc with postprocessing, then the script's # stdout and stderr are redirected to $_rc_original_stdout_fd and # $_rc_original_stderr_fd, so the output will be displayed on the # console but not intercepted by /etc/rc's postprocessor. # run_rc_script() { _file=$1 _arg=$2 if [ -z "$_file" -o -z "$_arg" ]; then err 3 'USAGE: run_rc_script file arg' fi _run_rc_script=true unset name command command_args command_interpreter \ extra_commands pidfile procname \ rcvar required_dirs required_files required_vars eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd _must_redirect=false if _have_rc_postprocessor \ && _has_rcorder_keyword interactive $_file then _must_redirect=true fi case "$_file" in *.sh) # run in current shell if $_must_redirect; then print_rc_metadata \ "note:Output from ${_file} is not logged" no_rc_postprocess eval \ 'set $_arg ; . $_file' else set $_arg ; . $_file fi ;; *[~#]|*.OLD|*.orig|*,v) # scratch file; skip warn "Ignoring scratch file $_file" ;; *) # run in subshell if [ -x $_file ] && $_must_redirect; then print_rc_metadata \ "note:Output from ${_file} is not logged" if [ -n "$rc_fast_and_loose" ]; then no_rc_postprocess eval \ 'set $_arg ; . $_file' else no_rc_postprocess eval \ '( set $_arg ; . $_file )' fi elif [ -x $_file ]; then if [ -n "$rc_fast_and_loose" ]; then set $_arg ; . $_file else ( set $_arg ; . $_file ) fi else warn "Ignoring non-executable file $_file" fi ;; esac } # # load_rc_config command # Source in the configuration file for a given command. # load_rc_config() { _command=$1 if [ -z "$_command" ]; then err 3 'USAGE: load_rc_config command' fi if ${_rc_conf_loaded:-false}; then : else . /etc/rc.conf _rc_conf_loaded=true fi if [ -f /etc/rc.conf.d/"$_command" ]; then . /etc/rc.conf.d/"$_command" fi } # # load_rc_config_var cmd var # Read the rc.conf(5) var for cmd and set in the # current shell, using load_rc_config in a subshell to prevent # unwanted side effects from other variable assignments. # load_rc_config_var() { if [ $# -ne 2 ]; then err 3 'USAGE: load_rc_config_var cmd var' fi eval $(eval '( load_rc_config '$1' >/dev/null; if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then echo '$2'=\'\''${'$2'}\'\''; fi )' ) } # # rc_usage commands # Print a usage string for $0, with `commands' being a list of # valid commands. # rc_usage() { echo -n 1>&2 "Usage: $0 [fast|force|one](" _sep= for _elem; do echo -n 1>&2 "$_sep$_elem" _sep="|" done echo 1>&2 ")" exit 1 } # # err exitval message # Display message to stderr and log to the syslog, and exit with exitval. # err() { exitval=$1 shift if [ -x /usr/bin/logger ]; then logger "$0: ERROR: $*" fi echo 1>&2 "$0: ERROR: $*" exit $exitval } # # warn message # Display message to stderr and log to the syslog. # warn() { if [ -x /usr/bin/logger ]; then logger "$0: WARNING: $*" fi echo 1>&2 "$0: WARNING: $*" } # # backup_file action file cur backup # Make a backup copy of `file' into `cur', and save the previous # version of `cur' as `backup' or use rcs for archiving. # # This routine checks the value of the backup_uses_rcs variable, # which can be either YES or NO. # # The `action' keyword can be one of the following: # # add `file' is now being backed up (and is possibly # being reentered into the backups system). `cur' # is created and RCS files, if necessary, are # created as well. # # update `file' has changed and needs to be backed up. # If `cur' exists, it is copied to to `back' or # checked into RCS (if the repository file is old), # and then `file' is copied to `cur'. Another RCS # check in done here if RCS is being used. # # remove `file' is no longer being tracked by the backups # system. If RCS is not being used, `cur' is moved # to `back', otherwise an empty file is checked in, # and then `cur' is removed. # # backup_file() { _action=$1 _file=$2 _cur=$3 _back=$4 if checkyesno backup_uses_rcs; then _msg0="backup archive" _msg1="update" # ensure that history file is not locked if [ -f $_cur,v ]; then rcs -q -u -U -M $_cur fi # ensure after switching to rcs that the # current backup is not lost if [ -f $_cur ]; then # no archive, or current newer than archive if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur rcs -q -kb -U $_cur co -q -f -u $_cur fi fi case $_action in add|update) cp -p $_file $_cur ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur rcs -q -kb -U $_cur co -q -f -u $_cur chown root:wheel $_cur $_cur,v ;; remove) cp /dev/null $_cur ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur rcs -q -kb -U $_cur chown root:wheel $_cur $_cur,v rm $_cur ;; esac else case $_action in add|update) if [ -f $_cur ]; then cp -p $_cur $_back fi cp -p $_file $_cur chown root:wheel $_cur ;; remove) mv -f $_cur $_back ;; esac fi } # # handle_fsck_error fsck_exit_code # Take action depending on the return code from fsck. # handle_fsck_error() { case $1 in 0) # OK return ;; 2) # Needs re-run, still fs errors echo "File system still has errors; re-run fsck manually!" ;; 4) # Root modified echo "Root file system was modified, rebooting ..." reboot -n echo "Reboot failed; help!" ;; 8) # Check failed echo "Automatic file system check failed; help!" ;; 12) # Got signal echo "Boot interrupted." ;; *) echo "Unknown error $1; help!" ;; esac stop_boot } # # _has_rcorder_keyword word file # Check whether a file contains a "# KEYWORD:" comment with a # specified keyword in the style used by rcorder(8). # _has_rcorder_keyword() { local word="$1" local file="$2" local line [ -r "$file" ] || return 1 while read line; do case "${line} " in "# KEYWORD:"*[\ \ ]"${word}"[\ \ ]*) return 0 ;; "#"*) continue ;; *[A-Za-z0-9]*) # give up at the first non-empty non-comment line return 1 ;; esac done <"$file" return 1 } # # print_rc_metadata string # Print the specified string in such a way that the post-processor # inside /etc/rc will treat it as meta-data. # # If we are not running inside /etc/rc, do nothing. # # For public use by any rc.d script, the string must begin with # "note:", followed by arbitrary text. The intent is that the text # will appear in a log file but not on the console. # # For private use within /etc/rc, the string must contain a # keyword recognised by the rc_postprocess_metadata() function # defined in /etc/rc, followed by a colon, followed by one or more # colon-separated arguments associated with the keyword. # print_rc_metadata() { # _rc_postprocessor fd, if defined, is the fd to which we must # print, prefixing the output with $_rc_metadata_prefix. # if _have_rc_postprocessor; then command printf "%s%s\n" "$rc_metadata_prefix" "$1" \ >&${_rc_postprocessor_fd} fi } # # _flush_rc_output # Arrange for output to be flushed, if we are running # inside /etc/rc with postprocessing. # _flush_rc_output() { print_rc_metadata "nop" } # # print_rc_normal [-n] string # Print the specified string in such way that it is treated as # normal output, regardless of whether or not we are running # inside /etc/rc with post-processing. # # If "-n" is specified in $1, then the string in $2 is printed # without a newline; otherwise, the string in $1 is printed # with a newline. # # Intended use cases include: # # o An rc.d script can use ``print_rc_normal -n'' to print a # partial line in such a way that it appears immediately # instead of being buffered by rc(8)'s post-processor. # # o An rc.d script that is run via the no_rc_postprocess # function (so most of its output is invisible to rc(8)'s # post-processor) can use print_rc_normal to force some of its # output to be seen by the post-processor. # # print_rc_normal() { # print to stdout or _rc_postprocessor_fd, depending on # whether not we have an rc postprocessor. # local fd=1 _have_rc_postprocessor && fd="${_rc_postprocessor_fd}" case "$1" in "-n") command printf "%s" "$2" >&${fd} _flush_rc_output ;; *) command printf "%s\n" "$1" >&${fd} ;; esac } # # no_rc_postprocess cmd... # Execute the specified command in such a way that its output # bypasses the post-processor that handles the output from # most commands that are run inside /etc/rc. If we are not # inside /etc/rc, then just execute the command without special # treatment. # # The intent is that interactive commands can be run via # no_rc_postprocess(), and their output will apear immediately # on the console instead of being hidden or delayed by the # post-processor. An unfortunate consequence of the output # bypassing the post-processor is that the output will not be # logged. # no_rc_postprocess() { if _have_rc_postprocessor; then "$@" >&${_rc_original_stdout_fd} 2>&${_rc_original_stderr_fd} else "$@" fi } # # twiddle # On each call, print a different one of "/", "-", "\\", "|", # followed by a backspace. The most recently printed value is # saved in $_twiddle_state. # # Output is to /dev/tty, so this function may be useful even inside # a script whose output is redirected. # twiddle() { case "$_twiddle_state" in '/') _next='-' ;; '-') _next='\' ;; '\') _next='|' ;; *) _next='/' ;; esac command printf "%s\b" "$_next" >/dev/tty _twiddle_state="$_next" } # # human_exit_code # Print the a human version of the exit code. # human_exit_code() { if [ "$1" -lt 127 ] then echo "exited with code $1" elif [ "$(expr $1 % 256)" -eq 127 ] then # This cannot really happen because the shell will not # pass stopped job status out and the exit code is limited # to 8 bits. This code is here just for completeness. echo "stopped with signal $(expr $1 / 256)" else echo "terminated with signal $(expr $1 - 128)" fi } # # collapse_backslash_newline # Copy input to output, collapsing # to nothing, but leaving other backslashes alone. # collapse_backslash_newline() { local line while read -r line ; do case "$line" in *\\) # print it, without the backslash or newline command printf "%s" "${line%?}" ;; *) # print it, with a newline command printf "%s\n" "${line}" ;; esac done } # Shell implementations of basename and dirname, usable before # the /usr file system is mounted. # basename() { local file="$1" local suffix="$2" local base base="${file##*/}" # remove up to and including last '/' base="${base%${suffix}}" # remove suffix, if any command printf "%s\n" "${base}" } dirname() { local file="$1" local dir case "$file" in /*/*) dir="${file%/*}" ;; # common case: absolute path /*) dir="/" ;; # special case: name in root dir */*) dir="${file%/*}" ;; # common case: relative path with '/' *) dir="." ;; # special case: name without '/' esac command printf "%s\n" "${dir}" } # Override the normal "echo" and "printf" commands, so that # partial lines printed by rc.d scripts appear immediately, # instead of being buffered by rc(8)'s post-processor. # # Naive use of the echo or printf commands from rc.d scripts, # elsewhere in rc.subr, or anything else that sources rc.subr, # will call these functions. To call the real echo and printf # commands, use "command echo" or "command printf". # echo() { command echo "$@" case "$1" in '-n') _flush_rc_output ;; esac } printf() { command printf "$@" case "$1" in *'\n') : ;; *) _flush_rc_output ;; esac } kat() { local i local v for i; do while read -r v; do v="${v%%#*}" if [ -z "$v" ]; then continue fi echo "$v" done < "$i" done } _rc_subr_loaded=: