#! /bin/sh # # $NetBSD: regpkg,v 1.23 2019/04/11 08:34:19 uki Exp $ # # Copyright (c) 2003,2009 The NetBSD Foundation, Inc. # All rights reserved. # # This code is derived from software contributed to The NetBSD Foundation # by Alistair Crooks (agc@NetBSD.org) # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # Usage: regpkg [options] set pkgname # # Registers a syspkg in the database directory, # and optionally creates a binary package. # # Options: # -q Quiet. # -v Verbose. # -f Force. # -m Ignore errors from missing files. # -u Update. # -c Use cached information from ${BUILD_INFO_CACHE}. # -d destdir Sets DESTDIR. # -t binpkgdir Create a binary package (in *.tgz format) in the # specified directory. Without this option, a binary # package is not created. # -M metalog Use the specified metalog file to override file # or directory attributes when creating a binary package. # -N etcdir Use the specified directory for passwd and group files. # # When -f is set: If the desired syspkg already exists, it is overwritten. # When -u is set: If the desired syspkg already exists, it might be # overwritten or left alone, depending on whether it's older # or newer than the files that belong to the syspkg. # When neither -u nor -f are set: It's an error for the desired syspkg # to already exist. prog="${0##*/}" toppid=$$ rundir="$(dirname "$0")" # ${0%/*} isn't good enough when there's no "/" . "${rundir}/sets.subr" bomb() { #echo "${prog}: bomb: start, toppid=${toppid} \$\$=$$" kill ${toppid} # in case we were invoked from a subshell #echo "${prog}: bomb: killed ${toppid}" exit 1 } # A literal newline nl=' ' # A literal tab tab=' ' # Prefixes for error messages, warnings, and important informational # messages. ERROR="${prog}: ERROR: " WARNING="${prog}: WARNING: " NOTE="${prog}: NOTE: " ERRWARN="${ERROR}" # may be changed by "-f" (force) command line flag ERRWARNNOTE="${ERROR}" # may be changed by "-u" (update) command line flag # # All temporary files will go in ${SCRATCH}, which will be deleted on # exit. # SCRATCH="$(${MKTEMP} -d "/var/tmp/${0##*/}.XXXXXX")" if [ $? -ne 0 -o \! -d "${SCRATCH}" ]; then echo >&2 "${prog}: Could not create scratch directory." bomb fi # # cleanup() always deletes the SCRATCH directory, and might also # delete other files or directories. # es=0 cleanup_must_delete_binpkgfile=false cleanup_must_delete_dbsubdir=false cleanup() { trap - 0 #echo "${prog}: cleanup start" if ${cleanup_must_delete_binpkgfile:-false} && [ -e "${binpkgfile}" ] then echo >&2 "${prog}: deleting partially-created ${binpkgfile}" rm -f "${binpkgfile}" fi if ${cleanup_must_delete_dbsubdir:-false} \ && [ -e "${SYSPKG_DB_SUBDIR}" ] then echo >&2 "${prog}: deleting partially-created ${SYSPKG_DB_SUBDIR}" rm -rf "${SYSPKG_DB_SUBDIR}" fi rm -rf "${SCRATCH}" #echo "${prog}: cleanup done, exit ${es}" exit ${es} } trap 'es=128; cleanup' 1 2 3 13 15 # HUP INT QUIT PIPE TERM trap 'es=$?; cleanup' 0 # EXIT # # Parse command line args. # verbose=false verbosity=0 quiet=false force=false update=false allowmissing=false DESTDIR="${DESTDIR}" binpkgdir="" metalog="" etcdir="" SYSPKG_DB_TOPDIR="" pkgset="" pkg="" parse_args() { while [ $# -gt 2 ]; do case "$1" in -q) quiet=true; verbose=false ;; -v) verbose=true; quiet=false verbosity=$(( ${verbosity} + 1 )) ;; -f) force=true ;; -u) update=true ;; -m) allowmissing=true ;; -c) # The -c option is ignored. The BUILD_INFO_CACHE # environment variable is used instead. ;; -d) DESTDIR="$2"; shift ;; -d*) DESTDIR="${1#-?}" ;; -t) binpkgdir="$2"; shift ;; -t*) binpkgdir="${1#-?}" ;; -M) metalog="$2"; shift ;; -M*) metalog="${1#-?}" ;; -N) etcdir="$2"; shift ;; -N*) etcdir="${1#-?}" ;; *) break ;; esac shift done if ${force}; then ERRWARN="${WARNING}" else ERRWARN="${ERROR}" fi if ${update}; then ERRWARNNOTE="${NOTE}" else ERRWARNNOTE="${ERRWARN}" fi DESTDIR="${DESTDIR%/}" # delete trailing "/" if any if [ \! -n "${etcdir}" ]; then etcdir="${DESTDIR}/etc" fi if [ -n "${binpkgdir}" -a \! -d "${binpkgdir}" ]; then echo >&2 "${ERROR}binary pkg directory ${binpkgdir} does not exist" bomb fi # # SYSPKG_DB_TOPDIR is the top level directory for registering # syspkgs. It defaults to ${DESTDIR}/var/db/syspkg, but can be # overridden by environment variables SYSPKG_DBDIR or PKG_DBDIR. # # Note that this corresponds to the default value of PKG_DBDIR # set in .../distrib/syspkg/mk/bsd.syspkg.mk. # SYSPKG_DB_TOPDIR="${SYSPKG_DBDIR:-${PKG_DBDIR:-${DESTDIR}/var/db/syspkg}}" if [ $# -ne 2 ]; then echo "Usage: regpkg [options] set pkgname" bomb fi pkgset="$1" pkg="$2" } # # make_PLIST() creates a skeleton PLIST from the pkgset description. # # The result is stored in the file ${PLIST}. # PLIST="${SCRATCH}/PLIST" make_PLIST() { if ${verbose}; then echo "Making PLIST for \"${pkg}\" package (part of ${pkgset} set)" fi prefix="${DESTDIR:-/}" realprefix=/ ${HOST_SH} "${rundir}/makeplist" -p "${prefix}" -I "${realprefix}" \ "${pkgset}" "${pkg}" \ >"${PLIST}" 2>"${SCRATCH}/makeplist-errors" if ${EGREP} -v '^DEBUG:' "${SCRATCH}/makeplist-errors"; then # "find" invoked from makeplist sometimes reports # errors about missing files or directories, and # makeplist ignores the errors. Catch them here. echo >&2 "${ERROR}makeplist reported errors for ${pkg}:" cat >&2 "${SCRATCH}/makeplist-errors" echo >&2 "${ERROR}see above for errors from makeplist" if ${allowmissing}; then echo >&2 "${prog}: ${NOTE}: ignoring above errors, due to '-m' option." else ${force} || bomb fi fi } # # init_allfiles() converts the PLIST (which contains relative filenames) # into a list of absolute filenames. Directories are excluded from the # result. # # The result is stored in the variable ${allfiles}. # allfiles='' init_allfiles() { [ -f "${PLIST}" ] || make_PLIST allfiles="$(${AWK} ' BEGIN { destdir = "'"${DESTDIR%/}"'" } /^@cwd/ { prefix = $2; next } /^@dirrm/ { next } { printf("%s%s%s\n", destdir, prefix, $0) }' "${PLIST}")" } # # init_newestfile() finds the newest file (most recent mtime). # # The result is stored in the variable ${newestfile}. # newestfile='' init_newestfile() { [ -s "${allfiles}" ] || init_allfiles # We assume no shell special characters in ${allfiles}, # and spaces only between file names, not inside file names. # This should be safe, because it has no no user-specified parts. newestfile="$(${LS} -1dt ${allfiles} | ${SED} '1q')" } # # Various ways of getting parts of the syspkg version number: # # get_osvers() - get the OS version number from osrelease.sh or $(uname -r), # return it in ${osvers}, and set ${method}. # get_tinyvers() - get the tiny version number from the "versions" file, # and return it in ${tinyvers}. Does not set ${method}. # get_newest_rcsid_date() - get the newest RCS date, # and return it in ${newest}. Does not set ${method}. # get_newest_mtime_date() - get the newest file modification date, # and return it in ${newest}. Does not set ${method}. # get_newest_date() - get date from rcsid or mtime, return it in ${newest}, # and set ${method}. # get_osvers() { if [ -f ../../sys/conf/osrelease.sh ]; then osvers="$(${HOST_SH} ../../sys/conf/osrelease.sh)" method=osreleases else osvers="$(${UNAME} -r)" method=uname fi #echo "${osvers}" } get_tinyvers() { tinyvers="$(${AWK} '$1 ~ '/"${pkg}"/' { print $2 }' \ "${rundir}/versions")" case "${tinyvers}" in "") tinyvers=0 ;; esac #echo "${tinyvers}" } get_newest_rcsid_date() { [ -s "${allfiles}" ] || init_allfiles # Old RCS identifiers might have 2-digit years, so we match both # YY/MM/DD and YYYY/MM/DD. We also try to deal with the Y10K # problem by allowing >4 digit years. newest=0 case "${allfiles}" in "") ;; *) newest="$(${IDENT} ${allfiles} 2>/dev/null | ${AWK} ' BEGIN { last = 0 } $2 == "crt0.c,v" { next } NF == 8 && \ $4 ~ /^[0-9][0-9]\/[0-9][0-9]\/[0-9][0-9]$/ \ { t = "19" $4; gsub("/", "", t); if (t > last) last = t; } NF == 8 && \ $4 ~ /^[0-9][0-9][0-9][0-9][0-9]*\/[0-9][0-9]\/[0-9][0-9]$/ \ { t = $4; gsub("/", "", t); if (t > last) last = t; } END { print last }')" method=ident ;; esac #echo "${newest}" } get_newest_mtime_date() { [ -s "${newestfile}" ] || init_newestfile # We could simplify the awk program to take advantage of the # fact thet it should have exactly one line of input. newest="$(${ENV_CMD} TZ=UTC LOCALE=C ${LS} -lT "${newestfile}" \ | ${AWK} ' BEGIN { newest = 0 } { t = $9 ""; if ($6 == "Jan") t = t "01"; if ($6 == "Feb") t = t "02"; if ($6 == "Mar") t = t "03"; if ($6 == "Apr") t = t "04"; if ($6 == "May") t = t "05"; if ($6 == "Jun") t = t "06"; if ($6 == "Jul") t = t "07"; if ($6 == "Aug") t = t "08"; if ($6 == "Sep") t = t "09"; if ($6 == "Oct") t = t "10"; if ($6 == "Nov") t = t "11"; if ($6 == "Dec") t = t "12"; if ($7 < 10) t = t "0"; t = t $7; #these next two lines add the 24h clock onto the date #gsub(":", "", $8); #t = sprintf("%s.%4.4s", t, $8); if (t > newest) newest = t; } END { print newest }')" #echo "${newest}" } get_newest_date() { get_newest_rcsid_date case "${newest}" in ""|0) get_newest_mtime_date method=ls ;; *) method=rcsid ;; esac #echo "${newest}" } # # choose_version_number() chooses the syspkg version number, # by concatenating several components (OS version, syspkg "tiny" # version and date). We end up with something like # osvers="3.99.15", tinyvers="0", newest="20060104", # and t="3.99.15.0.20060104". # # The result is stored in the variables ${t} and ${method}. # method='' t='' choose_version_number() { get_osvers; m1="${method}" get_tinyvers # does not set ${method} get_newest_date; m2="${method}" t="${osvers}.${tinyvers}.${newest}" method="${m1}.${m2}" # print version number that we're using if ${verbose}; then echo "${pkg} - ${t} version using ${method} method" fi } # # init_db_opts() sets the dbfile, dbtype and db_opts variables, # used for accessing the pkgdb.byfile.db database. # init_db_opts() { dbfile="${SYSPKG_DB_TOPDIR}/pkgdb.byfile.db" dbtype="btree" db_opts='' : ${TARGET_ENDIANNESS:="$(arch_to_endian "${MACHINE_ARCH}")"} case "${TARGET_ENDIANNESS}" in 4321) db_opts="${db_opts} -E B" # big-endian ;; 1234) db_opts="${db_opts} -E L" # little-endian ;; *) echo >&2 "${WARNING}Unknown or unsupported target endianness" echo >&2 "${NOTE}Using host endianness" ;; esac if ${update} || ${force}; then # overwriting an existing entry is not an error db_opts="${db_opts} -R" fi if [ ${verbosity} -lt 2 ]; then # don't print all the keys added to the database db_opts="${db_opts} -q" fi } # # print_dir_exec_lines outputs an "@exec install" line for each # directory in ${PLIST} # print_dir_exec_lines() { local dir uname gname mode local dot_slash_dir local no_dot_dir local word line ${AWK} '/^@dirrm/ { print $2 }' <"${PLIST}" | \ ${SORT} | \ while read dir; do # Sanitise the name. ${dir} could be an absolute or # relative name, with or without a leading "./". # ${dot_slash_dir} always has a leading "./" (except when # it's exactly equal to "."). ${no_dot_dir} never has a # leading "." or "/" (except when it's exactly equal to # "."). case "${dir}" in .|./|/) dot_slash_dir=. ;; ./*) dot_slash_dir="${dir}" ;; /*) dot_slash_dir=".${dir}" ;; *) dot_slash_dir="./${dir}" ;; esac no_dot_dir="${dot_slash_dir#./}" # Get the directory's owner, group, and mode # from the live file system, or let it be overridden # by the metalog. eval "$(${STAT} -f 'uname=%Su gname=%Sg mode=%#OLp' \ "${DESTDIR}/${dot_slash_dir}")" if [ -n "${metalog}" ]; then line="$(echo "${dot_slash_dir}" | \ ${AWK} -f "${rundir}/join.awk" \ /dev/stdin "${metalog}")" for word in ${line}; do case "${word}" in uname=*|gname=*|mode=*) eval "${word}" ;; esac done fi # XXX: Work around yet another pkg_add bug: @cwd lines # do not actually cause the working directory to change, # so file names in @exec lines need to be qualified by # %D, which (in our case, since we know there's an # "@cwd /" line) will be the dir name passed to # "pkg_add -p PREFIX". case "${no_dot_dir}" in .) d="%D" ;; *) d="%D/${no_dot_dir}" ;; esac cat <=${osvers}". For # example, etc-sys-etc-1.6ZI.0.20040206 might depend on # base-sys-root>=1.6ZI. # # Failing that, depend on any version "-[0-9]*". # # XXX: We could extend the format of the "deps" file to carry # this sort of information, so we wouldn't have to guess. # case "${t}" in ${osvers}.*) depversion=">=${osvers}" ;; *) depversion="-[0-9]*" ;; esac # # Add the dependencies. # # We always add a "@pkgdep" line for each prerequisite package. # # If the prerequisite pkg is already registered (as it should be # if our caller is doing things in the right order), then we put # its exact version number in a "@blddep" line. # ${AWK} '$1 ~ '/"${pkg}"/' { print $2 }' "${rundir}/deps" | ${SORT} | \ while read depname; do # ${pkgdepglob} is a shell glob pattern that should match # any version of a pkg. ${pkgdep} uses the special syntax # for pkg dependencies, and is not usable as a shell # glob pattern. pkgdepglob="${depname}-[0-9]*" pkgdep="${depname}${depversion}" echo "@pkgdep ${pkgdep}" blddep="$(cd "${SYSPKG_DB_TOPDIR}" && echo ${pkgdepglob} \ || bomb)" case "${blddep}" in *\*) # pkgdepglob did not match anything echo >&2 "${WARNING}${pkg} depends on '${pkgdep}' but there is no matching syspkg in ${SYSPKG_DB_TOPDIR}" ;; *\ *) # pkgdepglob matched more than once. echo >&2 "${ERRWARN}${pkg} depends on '${pkgdep}' but there are multiple matching syspkgs in ${SYSPKG_DB_TOPDIR}" ${force} || bomb # If ${force} is set, then assume that the last # match is the most recent. # XXX: This might be wrong, because of # differences between lexical sorting and # numeric sorting. lastmatch="${blddep##* }" echo "@blddep ${lastmatch}" ;; *) # exactly one match. # XXX: We ignore the possibility that the # version we found via ${pkgdepglob} might not # satisfy ${pkgdep}. We could conceivably use # "pkg_admin pmatch" to check, but that's not a # host tool so we can't assume that it will be # available. echo "@blddep ${blddep}" ;; esac done >>"${PLIST}" # create the comment (should be one line) comment="$(${AWK} '$1 ~ '/"${pkg}"/' \ { print substr($0, length($1) + 2) }' \ "${rundir}/comments")" case "${comment}" in "") echo >&2 "${WARNING}no comment for \"${pkg}\" (using placeholder)" comment="System package for ${pkg}" ;; *"${nl}"*) echo >&2 "${ERRWARN}multi-line comment for \"${pkg}\"" ${force} || bomb ;; esac echo "${comment}" > "${SYSPKG_DB_SUBDIR}/+COMMENT" # create the description (could be multiple lines) descr="$(${AWK} '$1 ~ '/"${pkg}"/' { print substr($0, length($1) + 2) }' \ "${rundir}/descrs")" case "${descr}" in "") echo >&2 "${WARNING}no description for \"${pkg}\" (re-using comment)" 2>&1 descr="${comment}" ;; esac echo "${descr}" > "${SYSPKG_DB_SUBDIR}/+DESC" ${PRINTF} "\nHomepage:\nhttp://www.NetBSD.org/\n" >> "${SYSPKG_DB_SUBDIR}/+DESC" # create the build information if [ x"${BUILD_INFO_CACHE}" = x ]; then { # These variables describe the build # environment, not the target. echo "OPSYS=$(${UNAME} -s)" echo "OS_VERSION=$(${UNAME} -r)" ${MAKE} -B -f- all < all: @echo OBJECT_FMT=${OBJECT_FMT} @echo MACHINE_ARCH=${MACHINE_ARCH} @echo MACHINE_GNU_ARCH=${MACHINE_GNU_ARCH} EOF } > "${SYSPKG_DB_SUBDIR}/+BUILD_INFO" else cp "${BUILD_INFO_CACHE}" "${SYSPKG_DB_SUBDIR}/+BUILD_INFO" fi # test for attributes args="" attrs="$(${AWK} '$1 ~ '/"${pkg}"/' { \ print substr($0, length($1) + 2) }' \ "${rundir}/attrs")" for a in "${attrs}"; do case "${attrs}" in "") ;; preserve) echo "${pkg}-${t}" >"${SYSPKG_DB_SUBDIR}/+PRESERVE" args="${args} -n ${SYSPKG_DB_SUBDIR}/+PRESERVE" ;; esac done # # Create ${SYSPKGSIR}/+CONTENTS from ${PLIST}, by adding an # "@name" line and a lot of "@comment MD5:" lines. # { rcsid='$NetBSD: regpkg,v 1.23 2019/04/11 08:34:19 uki Exp $' utcdate="$(${ENV_CMD} TZ=UTC LOCALE=C \ ${DATE} '+%Y-%m-%d %H:%M')" user="${USER:-root}" host="$(${HOSTNAME_CMD})" echo "@name ${pkg}-${t}" echo "@comment Packaged at ${utcdate} UTC by ${user}@${host}" echo "@comment Packaged using ${prog} ${rcsid}" # XXX: "option extract-in-place" might help to get # pkg_add to create directories. # XXX: no, it doesn't work. Yet another pkg_add bug. ## echo "@option extract-in-place" # Move the @pkgdep and @blddep lines up, so that # they are easy to see when people do "less # ${DESTDIR}/var/db/syspkg/*/+CONTENTS". ${EGREP} '^(@pkgdep|@blddep)' "${PLIST}" || true # Now do the remainder of the file. while read line; do case "${line}" in @pkgdep*|@blddep*) # already handled by grep above ;; @cwd*) # There should be exactly one @cwd line. # Just after it, add an "@exec mkdir" # line for every directory. This is to # work around a pkg-add bug (see # ) echo "${line}" print_dir_exec_lines ;; @*) # just pass through all other @foo lines echo "${line}" ;; *) # This should be a file name. Pass it # through, and append "@comment MD5:". # XXX why not SHA256 ? echo "${line}" file="${DESTDIR}${line}" if [ -f "${file}" -a -r "${file}" ]; then md5sum="$(${CKSUM} -n -m "${file}" \ | ${AWK} '{print $1}' )" echo "@comment MD5:${md5sum}" fi ;; esac done <"${PLIST}" } >"${SYSPKG_DB_SUBDIR}/+CONTENTS" # # Update ${SYSPKG_DB_TOPDIR}/pkgdb.byfile.db. # { init_db_opts # sets dbfile, dbtype, and db_opts # Transform ${PLIST} into a form to be used as keys in # ${dbfile}. The results look like absolute paths, # but they are really relative to ${DESTDIR}. # # "@dirrm ." -> "/" # "@dirrm foo/bar" -> "/foo/bar" # "@dirrm ./foo/bar" -> "/foo/bar" # "foo/bar/baz" -> "/foo/bar/baz" # "./foo/bar/baz" -> "/foo/bar/baz" # dblist="${SCRATCH}/dblist" ${AWK} '/^@dirrm \.\// {gsub("^.", "", $2); print $2; next} /^@dirrm \.$/ {print "/"; next} /^@dirrm/ {print "/" $2; next} /^@/ {next} /^\.\// {gsub("^.", "", $0); print $0; next} /./ {print "/" $0; next}' \ <"${PLIST}" >"${dblist}" # Add all the path names to the database. ${AWK} '{print $1 "\t" "'"${pkg}-${t}"'"}' <"${dblist}" \ | ${DB} -w ${db_opts} -F "${tab}" -f - "${dbtype}" "${dbfile}" } if ${verbose}; then echo "Registered ${pkg}-${t} in ${SYSPKG_DB_TOPDIR}" elif ! ${quiet}; then echo "Registered ${pkg}-${t}" fi cleanup_must_delete_dbsubdir=false } # # create_syspkg_tgz() creates the *.tgz file for the package. # # The output file is ${binpkgdir}/${pkg}-${t}.tgz. # create_syspkg_tgz() { # # pkg_create does not understand metalog files, so we have to # use pax directly. # # We create two specfiles: specfile_overhead describes the # special files that are part of the package system's metadata # (+CONTENTS, +COMMENT, +DESCR, and more); and specfile_payload # describes the files and directories that we actually want as # part of the package's payload. # # We then use the specfiles to create a compressed tarball that # contains both the overhead files and the payload files. # # There's no trivial way to get a single pax run to do # everything we want, so we run pax twice, with a different # working directory and a different specfile each time. # # We could conceivably make clever use of pax's "-s" option to # get what we want from a single pax run with a single (more # complicated) specfile, but the extra trouble doesn't seem # warranted. # cleanup_must_delete_binpkgfile=true specfile_overhead="${SCRATCH}/spec_overhead" specfile_payload="${SCRATCH}/spec_payload" tarball_uncompressed="${SCRATCH}/tarball_uncompressed" # Create a specfile for all the overhead files (+CONTENTS and # friends). { plusnames_first="${SCRATCH}/plusnames_first" plusnames_rest="${SCRATCH}/plusnames_rest" # Ensure that the first few files are in the same order # that "pkg_create" would have used, just in case anything # depends on that. Other files in alphabetical order. SHOULD_BE_FIRST="+CONTENTS +COMMENT +DESC" ( cd "${SYSPKG_DB_SUBDIR}" || bomb for file in ${SHOULD_BE_FIRST}; do [ -e "./${file}" ] && echo "${file}" done >"${plusnames_first}" ${LS} -1 | ${FGREP} -v -f "${plusnames_first}" \ >"${plusnames_rest}" \ || true ) # Convert the file list to specfile format, and override the # uid/gid/mode. { echo ". optional type=dir" ${AWK} '{print "./" $0 " type=file uid=0 gid=0 mode=0444" }' "${plusnames_first}" "${plusnames_rest}" } >"${specfile_overhead}" } # Create a specfile for the payload of the package. { spec1="${SCRATCH}/spec1" spec2="${SCRATCH}/spec2" # Transform ${PLIST} into simple specfile format: # # "@dirrm ." -> ". type=dir" # "@dirrm foo/bar" -> "./foo/bar type=dir" # "@dirrm ./foo/bar" -> "./foo/bar type=dir" # "foo/bar/baz" -> "./foo/bar/baz" # "./foo/bar/baz" -> "./foo/bar/baz" # # Ignores @cwd lines. This should be safe, given how # makeplist works. ${AWK} '/^@dirrm \.\// {print $2 " type=dir"; next} /^@dirrm \.$/ {print ". type=dir"; next} /^@dirrm/ {print "./" $2 " type=dir"; next} /^@/ {next} /^\.\// {print $0; next} /./ {print "./" $0; next}' \ <"${PLIST}" | # Escape some characters to match the new mtree(8) format. # C.f. usr.sbin/mtree/spec.c:vispath() # XXX escape only '[' for now ${SED} -e 's,\[,\\133,g' \ >"${spec1}" # If metalog was specified, attributes from metalog override # attributes in the file system. We also fake up an # entry for the ./etc/mtree/set.${pkgset} file. { if [ -n "${metalog}" ]; then ${AWK} -f "${rundir}/join.awk" \ "${spec1}" "${metalog}" ${AWK} -f "${rundir}/join.awk" \ "${spec1}" /dev/stdin <"${spec2}" # # If a file or directory to was mentioned explicitly # in ${PLIST} but not mentioned in ${metalog}, then the # file or directory will not be mentioned in ${spec2}. # This is an error, and means that the metalog was # not built correctly. # if [ -n "${metalog}" ]; then names1="${SCRATCH}/names1" names2="${SCRATCH}/names2" # There is different format between spec1 and spec2 for test(1). # spec1's format is "./bin/\133" but spec2's format is "./bin/[" # XXX filtering for only '[' now ${AWK} '{print $1}' <"${spec1}" | ${SORT} | sed -e 's,\\133,\[,g' >"${names1}" ${AWK} '{print $1}' <"${spec2}" | ${SORT} | sed -e 's,\[,\\133,g' >"${names2}" if ${FGREP} -v -f "${names2}" "${spec1}" >/dev/null then cat >&2 <&2 ${force} || bomb fi if ${FGREP} -v -f "${names1}" "${spec2}" >/dev/null then cat >&2 <&2 bomb fi fi # Add lines (tagged "optional") for any implicit directories. # # For example, if we have a file ./foo/bar/baz, then we add # "./foo/bar optional type=dir", "./foo optional type=dir", # and ". optional type=dir", unless those directories were # already mentioned explicitly. # ${AWK} -f "${rundir}/getdirs.awk" "${spec2}" \ | ${SORT} -u >"${specfile_payload}" } # Use two pax invocations followed by gzip to create # the tgz file. # # Remove any leading "./" from path names, because that # could confuse tools that work with binary packages. ( cd "${SYSPKG_DB_SUBDIR}" && \ ${PAX} -O -w -d -N"${etcdir}" -M '-s,^\./,,' \ -f "${tarball_uncompressed}" \ <"${specfile_overhead}" \ || bomb ) ( cd "${DESTDIR:-/}" && \ ${PAX} -O -w -d -N"${etcdir}" -M '-s,^\./,,' \ -a -f "${tarball_uncompressed}" \ <"${specfile_payload}" \ || bomb ) ${GZIP_CMD} -9n <"${tarball_uncompressed}" >"${binpkgfile}" || bomb # (Extra space is to make message line up with "Registered" message.) if ${verbose}; then echo " Packaged ${binpkgfile}" elif ! ${quiet}; then echo " Packaged ${binpkgfile##*/}" fi cleanup_must_delete_binpkgfile=false } # # do_register_syspkg() registers the syspkg if appropriate. # # If SYSPKG_DB_SUBDIR already exists, that might be an error, depending # on ${force} and ${update} flags. # do_register_syspkg() { # Check that necessary variables are defined [ -n "${SYSPKG_DB_TOPDIR}" ] || bomb [ -n "${SYSPKG_DB_SUBDIR}" ] || bomb # Create SYSPKG_DB_TOPDIR if necessary [ -d "${SYSPKG_DB_TOPDIR}" ] || mkdir -p "${SYSPKG_DB_TOPDIR}" || bomb # A function to delete db entries referring to any version of ${pkg} delete_old_db_entries() { init_db_opts # sets dbfile, dbtype, and db_opts dblist="${SCRATCH}/dblist" ${DB} ${db_opts} -O "${tab}" "${dbtype}" "${dbfile}" \ | ${AWK} -F "${tab}" '$2 ~ /^'"${pkg}"'-[0-9]/ { print $1 }' \ >"${dblist}" ${DB} -d ${db_opts} -f "${dblist}" "${dbtype}" "${dbfile}" } # A function to delete any old version of ${pkg} delete_old_pkg() { pattern="${pkg}-[0-9]*" matches="$(cd "${SYSPKG_DB_TOPDIR}" && echo ${pattern} \ || bomb)" echo >&2 "${NOTE}deleting old pkg (${matches})" cleanup_must_delete_dbsubdir=true delete_old_db_entries ( cd "${SYSPKG_DB_TOPDIR}" && rm -rf ${matches} ) } # Check whether another version of ${pkg} is already registered. pattern="${pkg}-[0-9]*" matches="$(cd "${SYSPKG_DB_TOPDIR}" && echo ${pattern} || bomb)" case "${matches}" in *\*) ;; # wildcard did not match anything "${pkg}-${t}") ;; # exact match *) echo >&2 "${ERRWARNNOTE}another version of ${pkg} is already registered" ${verbose} && echo >&2 " in ${SYSPKG_DB_TOPDIR}" ${verbose} && echo >&2 " (while registering ${pkg}-${t})" ${force} || ${update} || bomb delete_old_pkg ;; esac # Check whether the desired version of ${pkg} is already registered, # and create it if appropriate. if [ -d "${SYSPKG_DB_SUBDIR}" ]; then echo >&2 "${ERRWARNNOTE}${pkg}-${t} is already registered" ${verbose} && echo >&2 " in ${SYSPKG_DB_TOPDIR}" if ${force}; then delete_old_pkg register_syspkg elif ${update}; then # # If all files in SYSPKG_DB_SUBDIR are newer # than all files in the pkg, then do nothing. # Else delete and re-register the pkg. # [ -n "${newestfile}" ] || init_newestfile if [ -n "${newestfile}" ]; then case "$(${FIND} "${SYSPKG_DB_SUBDIR}" -type f \ ! -newer "${newestfile}" -print)" \ in "") ;; *) echo >&2 "${NOTE}some files are newer but pkg version is unchanged" delete_old_pkg register_syspkg ;; esac else # No files in the pkg? (This could happen # if a pkg contains only directories.) # Do nothing (keep the already-registered pkg). : fi else bomb fi else register_syspkg fi } # # do_create_syspkg_tgz() creates the binary pkg (*.tgz) if # appropriate. # # If binpkgfile already exists, that might be an error, depending on # ${force} and ${update} flags. # do_create_syspkg_tgz() { [ -n "${binpkgfile}" ] || bomb delete_and_recreate() { echo >&2 "${ERRWARNNOTE}deleting and re-creating ${pkg}-${t}.tgz" rm -f "${binpkgfile}" create_syspkg_tgz } # Check whether another version of ${pkg} already exists. pattern="${pkg}-[0-9]*" matches="$(cd "${binpkgdir}" && echo ${pattern} || bomb)" case "${matches}" in *\*) ;; # wildcard did not match anything "${pkg}-${t}.tgz") ;; # exact match *) echo >&2 "${ERRWARNNOTE}another version of ${pkg} binary pkg already exists" ${verbose} && echo >&2 " in ${binpkgdir}" ${verbose} && echo >&2 " (while creating ${pkg}-${t}.tgz)" # If neither force nor update, this is a fatal error. # If force but not update, then leave old .tgz in place. # If update, then delete the old .tgz. ${force} || ${update} || bomb if ${update}; then echo >&2 "${NOTE}deleting old binary pkg (${matches})" ( cd "${binpkgdir}" && rm -f ${matches} || bomb ) fi ;; esac # Check whether the desired version of ${pkg} already exists, # and create it if appropriate. if [ -e "${binpkgfile}" ]; then echo >&2 "${ERRWARNNOTE}${pkg}-${t}.tgz already exists" ${verbose} && echo >&2 " in ${binpkgdir}" if ${force}; then delete_and_recreate elif ${update}; then # # If all files in SYSPKG_DB_SUBDIR are older # than ${binpkgfile}, then do nothing. # Else delete and re-create the tgz. # case "$(${FIND} "${SYSPKG_DB_SUBDIR}" -type f \ -newer "${binpkgfile}" -print)" \ in "") ;; *) delete_and_recreate ;; esac else bomb fi else create_syspkg_tgz fi } #################### # begin main program parse_args ${1+"$@"} make_PLIST choose_version_number SYSPKG_DB_SUBDIR="${SYSPKG_DB_TOPDIR}/${pkg}-${t}" do_register_syspkg if [ -n "${binpkgdir}" ]; then binpkgfile="${binpkgdir}/${pkg}-${t}.tgz" do_create_syspkg_tgz fi exit 0