.\" $NetBSD: systat.1,v 1.51 2018/12/28 12:21:53 wiz Exp $ .\" .\" Copyright (c) 1985, 1990, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)systat.1 8.2 (Berkeley) 12/30/93 .\" .Dd December 26, 2018 .Dt SYSTAT 1 .Os .Sh NAME .Nm systat .Nd display system statistics in a full-screen view .Sh SYNOPSIS .Nm .Op Fl bn .Op Fl M Ar core .Op Fl N Ar system .Op Fl t Ar turns .Op Fl w Ar wait .Op Ar display .Op Ar refresh-interval .Sh DESCRIPTION .Nm displays various system statistics in a screen oriented fashion using the curses screen display library, .Xr curses 3 . .Pp While .Nm is running the screen is usually divided into two windows (an exception is the vmstat display which uses the entire screen). The upper window depicts the current system load average. The information displayed in the lower window may vary, depending on user commands. The last line on the screen is reserved for user input and error messages. .Pp By default .Nm displays the processes getting the largest percentage of the processor in the lower window. Other displays show more detailed process information, swap space usage, disk usage statistics (a la .Xr df 1 ) , disk I/O statistics (a la .Xr iostat 8 ) , virtual memory statistics (a la .Xr vmstat 1 ) , network ``mbuf'' utilization, network 'ifstat' traffic, and network connections (a la .Xr netstat 1 ) . .Pp Input is interpreted at two different levels. A ``global'' command interpreter processes all keyboard input. If this command interpreter fails to recognize a command, the input line is passed to a per-display command interpreter. This allows each display to have certain display-specific commands. .Pp Command line options: .Bl -tag -width "refresh_interval" .It Fl M Ar core Extract values associated with the name list from .Ar core instead of the default .Pa /dev/mem . .It Fl N Ar system Extract the name list from .Ar system instead of the default .Pa /netbsd . .It Fl b Show the chosen display once and exit. .It Fl n Do not resolve IP addresses into string hostnames .Pq FQDNs on .Ic netstat . It has the same effect as .Ic numbers subcommand in .Ic netstat . .It Fl w Ar wait See .Ar refresh-interval . .It Fl t Ar turns How many refreshes to show each screen in 'all' display mode. .It Ar display The .Ar display argument expects to be one of: .Ic all , .Ic bufcache , .Ic df , .Ic ifstat , .Ic inet.icmp , .Ic inet.ip , .Ic inet.tcp , .Ic inet.tcpsyn , .Ic inet6.ip6 , .Ic iostat , .Ic mbufs , .Ic netstat , .Ic pigs , .Ic ps , .Ic swap , .Ic syscall or .Ic vmstat . These displays can also be requested interactively and are described in full detail below. .It Ar refresh-interval The .Ar refresh-interval specifies the screen refresh time interval in seconds. This is provided for backwards compatibility, and overrides the .Ar refresh-interval specified with the .Fl w flag. .El .Pp Certain characters cause immediate action by .Nm . These are .Bl -tag -width Fl .It Ic \&^L Refresh the screen. .It Ic \&^G Print the name of the current ``display'' being shown in the lower window and the refresh interval. .It Ic \&^Z Stop .Nm . .It Ic \&? , Ic h Print the names of the available displays on the command line. .It Ic \&: Move the cursor to the command line and interpret the input line typed as a command. While entering a command the current character erase, word erase, and line kill characters may be used. .El .Pp The following commands are interpreted by the ``global'' command interpreter. .Bl -tag -width Fl .It Ic help Ar key Print the names of the available displays on the command line. It will print long names as .Dq Ic inet.* . To print items under .Dq Ic inet , give .Ic inet as .Ar key . .It Ic load Print the load average over the past 1, 5, and 15 minutes on the command line. .It Ic stop Stop refreshing the screen. .It Oo Ic start Oc Oo Ar number Oc Start (continue) refreshing the screen. If a second, numeric, argument is provided it is interpreted as a refresh interval in seconds. Supplying only a number will set the refresh interval to this value. .It Ic quit Exit .Nm . (This may be abbreviated to .Ic q . ) .El .Pp The available displays are: .Bl -tag -width Ic .It Ic all Cycle through all displays automatically. At each display, wait some refresh-turns, then switch to the next display. Duration of one refresh-turn is adjustable with the .Fl w option, number of refresh-turns can be changed with the .Fl t option. .It Ic bufcache Display, in the lower window, statistics about the file system buffers. Statistics for each file system that has active buffers include the number of buffers for that file system, the number of active kilobytes in those buffers and the total size of the buffers for that file system. .It Ic df Lists disk usage statistics for all filesystems, including the available free space as well as a bar graph indicating the used capacity. .Pp The following commands are specific to the .Ic df display: .Pp .Bl -tag -width Fl -compact .It Cm all Displays information for all filesystems, including kernfs, procfs and null-mounts. .It Cm some Suppress information about procfs, kernfs and null-mounts (default). .El .It Ic ifstat Display the network traffic going through active interfaces on the system. Idle interfaces will not be displayed until they receive some traffic. .Pp For each interface being displayed, the current, peak and total statistics are displayed for incoming and outgoing traffic. By default, the .Ic ifstat display will automatically scale the units being used so that they are in a human-readable format. The scaling units used for the current and peak traffic columns can be altered by the .Ic scale command. .Bl -tag -width ".Cm scale Op Ar units" .It Cm scale Op Ar units Modify the scale used to display the current and peak traffic over all interfaces. The following units are recognised: kbit, kbyte, mbit, mbyte, gbit, gbyte and auto. .It Cm pps Show statistics in packets per second instead of bytes/bits per second. A subsequent call of .Ic pps switches this mode off. .It Cm match Op Ar patterns Display only interfaces that match pattern provided as an argument. Patterns should be in shell syntax separated by whitespaces or commas. If this command is called without arguments then all interfaces are displayed. For example: .Pp .Dl match re0, bge1 .Pp This will display re0 and bge1 interfaces. .Pp .Dl match re*, bge*, lo0 .Pp This will display all .Ic re interfaces, all .Ic bge interfaces and the loopback interface. .El .It Ic inet.icmp Display ICMP statistics. .It Ic inet.ip Display IPv4 and UDP statistics. .It Ic inet.tcp Display TCP statistics. .It Ic inet.tcpsyn Display statistics about the TCP ``syncache''. .It Ic inet6.ip6 Display IPv6 statistics. .It Ic iostat Display, in the lower window, statistics about processor use and disk throughput. Statistics on processor use appear as bar graphs of the amount of time executing in user mode (``user''), in user mode running low priority processes (``nice''), in system mode (``system''), and idle (``idle''). Statistics on disk throughput show, for each drive, kilobytes of data transferred, number of disk transactions performed, and time spent in disk accesses in milliseconds. This information may be displayed as bar graphs or as rows of numbers which scroll downward. Bar graphs are shown by default; .Pp The following commands are specific to the .Ic iostat display; the minimum unambiguous prefix may be supplied. .Pp .Bl -tag -width Fl -compact .It Cm numbers Show the disk I/O statistics in numeric form. Values are displayed in numeric columns which scroll downward. .It Cm bars Show the disk I/O statistics in bar graph form (default). .It Cm secs Toggle the display of time in disk activity (the default is to not display time). .It Cm all Show the read and write statistics combined (default). .It Cm rw Show the read and write statistics separately. .El .It Ic mbufs Display, in the lower window, the number of mbufs allocated for particular uses, i.e. data, socket structures, etc. .It Ic netstat Display, in the lower window, network connections. By default, network servers awaiting requests are not displayed. Each address is displayed in the format ``host.port'', with each shown symbolically, when possible. It is possible to have addresses displayed numerically, limit the display to a set of ports, hosts, and/or protocols (the minimum unambiguous prefix may be supplied): .Pp .Bl -tag -width Ar -compact .It Cm all Toggle the displaying of server processes awaiting requests (this is the equivalent of the .Fl a flag to .Ar netstat 1 ) . .It Cm numbers Display network addresses numerically. .It Cm names Display network addresses symbolically. .It Ar protocol Display only network connections using the indicated protocol (currently either ``tcp'' or ``udp''). .It Cm ignore Op Ar items Do not display information about connections associated with the specified hosts or ports. Hosts and ports may be specified by name (``vangogh'', ``ftp''), or numerically. Host addresses use the Internet dot notation (``128.32.0.9''). Multiple items may be specified with a single command by separating them with spaces. .It Cm display Op Ar items Display information about the connections associated with the specified hosts or ports. As for .Ar ignore , .Op Ar items may be names or numbers. .It Cm show Op Ar ports\&|hosts Show, on the command line, the currently selected protocols, hosts, and ports. Hosts and ports which are being ignored are prefixed with a `!'. If .Ar ports or .Ar hosts is supplied as an argument to .Cm show , then only the requested information will be displayed. .It Cm reset Reset the port, host, and protocol matching mechanisms to the default (any protocol, port, or host). .El .It Ic pigs Display, in the lower window, those processes which are getting the largest portion of the processor (the default display). When less than 100% of the processor is scheduled to user processes, the remaining time is accounted to the ``idle'' process. .It Ic ps Display, in the lower window, the same information provided by the command .Xr ps 1 with the flags .Fl aux . .Pp The following command is specific to the .Ic ps display; the minimum unambiguous prefix may be supplied. .Pp .Bl -tag -width Fl -compact .It Cm user Ar name Limit the list of processes displayed to those owned by user .Ar name . If .Ar name is specified as `+', processes owned by any user are displayed (default). .El .It Ic swap Show information about swap space usage on all the swap areas configured with .Xr swapctl 8 . The first column is the device name of the partition. The next column is the total space available in the partition. The .Ar Used column indicates the total blocks used so far; the graph shows the percentage of space in use on each partition. If there are more than one swap partition in use, a total line is also shown. Areas known to the kernel, but not in use are shown as not available. .It Ic syscall Show per system call statistics. The display consists of several columns of system call name and counts. .Pp In order to stop entries moving around the screen too much, an infinite response filter is applied to the values before they are sorted. .Pp The following commands are specific to the .Ic syscall display: .Pp .Bl -tag -width Ar -compact .It Ic sort Ic name Sort display by the syscall name (default). .It Ic sort Ic count Sort display by the count of calls or time spent in the calls. .It Ic sort Ic syscall Sort display be syscall number. .It Ic show Ic count Show the number of times the system call has be called (default). .It Ic show Ic time Show the average amount of time (in arbitrary units) spent in a call of the syscall. .El .It Ic vmstat Take over the entire display and show a (rather crowded) compendium of statistics related to virtual memory usage, process scheduling, device interrupts, system name translation caching, disk I/O etc. .Pp The upper left quadrant of the screen shows the number of users logged in and the load average over the last one, five, and fifteen minute intervals. Below this are statistics on memory utilization. The first row of the table reports memory usage only among active processes, that is processes that have run in the previous twenty seconds. The second row reports on memory usage of all processes. The first column reports on the number of physical pages claimed by processes. The second column reports the number of physical pages that are devoted to read only text pages. The third and fourth columns report the same two figures for virtual pages, that is the number of pages that would be needed if all processes had all of their pages. Finally the last column shows the number of physical pages on the free list. .Pp Below the memory display is a list of the average number of processes (over the last refresh interval) that are runnable (`r'), in page wait (`p'), in disk wait other than paging (`d'), sleeping (`s'). Below the queue length listing is a numerical listing and a bar graph showing the amount of system (shown as `='), user (shown as `>'), nice (shown as `-'), and idle time (shown as ` '). .Pp To the right of the process statistics is a column that lists the average number of context switches (`Csw'), traps (`Traps'; includes page faults), system calls (`SysCa'), interrupts (`Intr'), network software interrupts (`Soft'), page faults (`Fault'). .Pp Below this are statistics on memory utilization. The first row of the table reports memory usage only among active processes, that is processes that have run in the previous twenty seconds. The second row reports on memory usage of all processes. The first column reports on the number of physical pages claimed by processes. The second column reports the number of pages of memory and swap. The third column gives the number of pages of free memory and swap. .Pp Below the memory display are statistics on name translations. It lists the number of names translated in the previous interval, the number and percentage of the translations that were handled by the system wide name translation cache, and the number and percentage of the translations that were handled by the per process name translation cache. .Pp At the bottom left is the disk usage display. It reports the number of seeks, transfers, number of kilobyte blocks transferred per second averaged over the refresh period of the display (by default, five seconds), and the time spent in disk accesses. If there are more than five disks, and the terminal window has more than 24 lines, the disks display will be flipped so that more of the disk statistics are visible. .Pp Under the date in the upper right hand quadrant are statistics on paging and swapping activity. The first two columns report the average number of pages brought in and out per second over the last refresh interval due to page faults and the paging daemon. The third and fourth columns report the average number of pages brought in and out per second over the last refresh interval due to swap requests initiated by the scheduler. The first row of the display shows the average number of disk transfers per second over the last refresh interval; the second row of the display shows the average number of pages transferred per second over the last refresh interval. .Pp Below the paging statistics is another columns of paging data. From top to bottom, these represent: .Pp .Bl -tag -width Fl -compact .It Sq Ic forks number of .Fn fork calls .It Sq Ic fkppw number of .Fn fork calls where parent waits .It Sq Ic fksvm number of .Fn fork calls where vmspace is shared .It Sq Ic pwait number of times fault had to wait on a page .It Sq Ic relck number of times .Fn uvmfault_relock is called .It Sq Ic rlkok number of times .Fn uvmfault_relock is a success .It Sq Ic noram number of times fault was out of RAM .It Sq Ic ndcpy number of times fault clears ``needs copy'' .It Sq Ic fltcp number of times fault promotes with copy (2b) .It Sq Ic zfod number of times fault promotes with zerofill (2b) .It Sq Ic cow number of times faulted for anonymous for Copy-On-Write (case 1b) .It Sq Ic fmin min number of free pages .It Sq Ic ftarg target number of free pages .It Sq Ic itarg target number of inactive pages .It Sq Ic flnan number of times fault was out of anonymous pages .It Sq Ic pdfre number of pages daemon freed since boot .It Sq Ic pdscn number of pages daemon scanned since boot .El .Pp Note that the `%zfod' percentage is usually less than 100%, however it may exceed 100% if a large number of requests are actually used long after they were set up during a period when no new pages are being set up. Thus this figure is most interesting when observed over a long time period, such as from boot time (see below on getting such a display). .Pp To the left of the column of paging statistics is a breakdown of the interrupts being handled by the system. At the top of the list is the total interrupts per second over the time interval. The rest of the column breaks down the total on a device by device basis. Only devices that have interrupted at least once since boot time are shown. .El .Pp Commands to switch between displays may be abbreviated to the minimum unambiguous prefix; for example, ``io'' for ``iostat''. Certain information may be discarded when the screen size is insufficient for display. For example, on a machine with 10 drives the .Ic iostat bar graph displays only 3 drives on a 24 line terminal. When a bar graph would overflow the allotted screen space it is truncated and the actual value is printed ``over top'' of the bar. .Pp The following commands are common to each display which shows information about disk drives. These commands are used to select a set of drives to report on, should your system have more drives configured than can normally be displayed on the screen. Drives may be specified as drive names or as patterns specified in the notation described by .Xr fnmatch 3 . .Pp .Bl -tag -width Ar -compact .It Cm display Op Ar drives Display information about the drives indicated. Multiple drives may be specified, separated by spaces. .It Cm ignore Op Ar drives Do not display information about the drives indicated. Multiple drives may be specified, separated by spaces. .It Cm drives Op Ar drives With no arguments, display a list of available drives. With arguments, replace the list of currently displayed drives with the ones specified. .El .Pp The following commands are specific to the .Ic inet.* , .Ic inet6.* , .Ic syscall and .Ic vmstat displays; the minimum unambiguous prefix may be supplied. .Pp .Bl -tag -width Ar -compact .It Cm boot Display cumulative statistics since the system was booted. .It Cm run Display statistics as a running total from the point this command is given. .It Cm time Display statistics averaged over the refresh interval (the default). .It Cm zero Reset running statistics to zero. .El .Sh FILES .Bl -tag -width /etc/networks -compact .It Pa /netbsd For the namelist. .It Pa /dev/kmem For information in main memory. .It Pa /etc/hosts For host names. .It Pa /etc/networks For network names. .It Pa /etc/services For port names. .El .Sh NOTES Much of the information that .Nm .Ic vmstat uses is obtained from .Cm struct vmmeter cnt . .Sh SEE ALSO .Xr df 1 , .Xr netstat 1 , .Xr ps 1 , .Xr top 1 , .Xr vmstat 1 , .Xr iostat 8 , .Xr pstat 8 .Sh HISTORY The .Nm program appeared in .Bx 4.3 . .Sh BUGS Consumes CPU resources and thus may skew statistics. .Pp Certain displays presume a minimum of 80 characters per line. .Pp The .Ic vmstat display looks out of place because it is (it was added in as a separate display from what used to be a different program). .Pp The .Fl b option requires a real terminal and could be converted to simply output to standard output.