Package: bcache-tools Priority: optional Section: utils Installed-Size: 105 Maintainer: Tom Strickx Architecture: amd64 Version: 1.0.4-drbl1 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.4), libuuid1 (>= 2.16), initramfs-tools Filename: pool/drbl/live-ubuntu-experimental/bcache-tools/bcache-tools_1.0.4-drbl1_amd64.deb Size: 15536 MD5sum: 82e243084242e69dd8bf82c668bfc574 SHA1: e2960abdb70aeb76dc8470141ec9b808b7827133 SHA256: 6dd69d0e8cf21b62c0904ad0198b5a49eac79eda5759f4cfe86c9624a1c2cdd4 SHA512: eac0ee5734fb14d11294635f8754a46e5848f8774cbe95bdfb36ec6edb64954308f3576030239ca0feaa15dabb6c6da92c096a4dc32a00ee60c405988b7d5f3b Description: bcache userspace tools Bcache allows the use of SSDs to cache other block devices. . Documentation for the run time interface is included in the kernel tree, in Documentation/bcache.txt. . This package includes udev rules, initramfs support and the following tools: make-bcache Formats block devices for use with bcache. Devices can be formatted for use as a cache or as a backing device. The most important option is for specifying the bucket size. Allocation is done in terms of buckets, and cache hits are counted per bucket; thus a smaller bucket size will give better cache utilization, but poorer write performance. The bucket size is intended to be equal to the size of your SSD's erase blocks, which seems to be 128k-512k for most SSDs; feel free to experiment. . bcache-super-show Prints the bcache superblock of a cache device or a backing device. Homepage: http://bcache.evilpiepirate.org/ Package: bcache-tools Priority: optional Section: utils Installed-Size: 99 Maintainer: Tom Strickx Architecture: i386 Version: 1.0.4-drbl1 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.4), libuuid1 (>= 2.16), initramfs-tools Filename: pool/drbl/live-ubuntu-experimental/bcache-tools/bcache-tools_1.0.4-drbl1_i386.deb Size: 15754 MD5sum: c4d7c638547266120a64c15e107b2551 SHA1: 75b8bcd3ccc211368a2691912d78eece1b15964a SHA256: 89aef2a59284449c1018c2e3d1b48cfec4413146d90a02242e5d692f160a971c SHA512: cddb6c9449674db1ceff98d0458b9e78d9562582542ecb66c8cbc5b49de8cdc2e9f52aae356918bf183a48916953d99d159eaa774b94112e4b482f9c935bc0ca Description: bcache userspace tools Bcache allows the use of SSDs to cache other block devices. . Documentation for the run time interface is included in the kernel tree, in Documentation/bcache.txt. . This package includes udev rules, initramfs support and the following tools: make-bcache Formats block devices for use with bcache. Devices can be formatted for use as a cache or as a backing device. The most important option is for specifying the bucket size. Allocation is done in terms of buckets, and cache hits are counted per bucket; thus a smaller bucket size will give better cache utilization, but poorer write performance. The bucket size is intended to be equal to the size of your SSD's erase blocks, which seems to be 128k-512k for most SSDs; feel free to experiment. . bcache-super-show Prints the bcache superblock of a cache device or a backing device. Homepage: http://bcache.evilpiepirate.org/ Package: chntpw Priority: optional Section: admin Installed-Size: 126 Maintainer: Javier Fernandez-Sanguino Pen~a Architecture: amd64 Version: 0.99.6-2.drbl1 Depends: libc6 (>= 2.14), libgcrypt11 (>= 1.4.5) Filename: pool/drbl/live-ubuntu-experimental/chntpw/chntpw_0.99.6-2.drbl1_amd64.deb Size: 48228 MD5sum: 704ca5a9debe0c13d1d447bf0034c7b9 SHA1: 98c462d6ac028acef5a6be213520008763efc3e4 SHA256: 002a45ae7d6435ced71708a5bac908eb3c1b6f802de78c067fa86e29df3ca90d SHA512: 68edaeecb4de9d8c15b30c17078433584c49eefdc2a3582f0cf3551ca108a580210b3f4befef7e3c8af11a9f52ff5d773af34a3a8a2e1b2eb9c1c4aef8bb60e8 Description: NT SAM password recovery utility This little program provides a way to view information and change user passwords in a Windows NT/2000 user database file. Old passwords need not be known since they are overwritten. In addition it also contains a simple registry editor (same size data writes) and an hex-editor which enables you to fiddle around with bits and bytes in the file as you wish. . If you want GNU/Linux bootdisks for offline password recovery you can add this utility to custom image disks or use those provided at the tools homepage. Homepage: http://pogostick.net/~pnh/ntpasswd/ Package: chntpw Priority: optional Section: admin Installed-Size: 125 Maintainer: Javier Fernandez-Sanguino Pen~a Architecture: i386 Version: 0.99.6-2.drbl1 Depends: libc6 (>= 2.7), libgcrypt11 (>= 1.4.5) Filename: pool/drbl/live-ubuntu-experimental/chntpw/chntpw_0.99.6-2.drbl1_i386.deb Size: 46944 MD5sum: ccc9b44cd3d4b88005b2c1687df616c8 SHA1: 3fdd7d2d23db8bc61a370ceafc4520b4c2406bd5 SHA256: bf7ecc04a71d68f63a860b71339152162c2874d250376d0281fa64fda814e20f SHA512: b9cf4f5f65a548bc9298fa106b92e3267ce22e329cb460e6a35baa363345c5cb71d9c59cdf189d947c95abb30231af40dce209b45aad893e95a95618fc2e5a4b Description: NT SAM password recovery utility This little program provides a way to view information and change user passwords in a Windows NT/2000 user database file. Old passwords need not be known since they are overwritten. In addition it also contains a simple registry editor (same size data writes) and an hex-editor which enables you to fiddle around with bits and bytes in the file as you wish. . If you want GNU/Linux bootdisks for offline password recovery you can add this utility to custom image disks or use those provided at the tools homepage. Homepage: http://pogostick.net/~pnh/ntpasswd/ Package: dosfstools-dbg Priority: extra Section: debug Installed-Size: 178 Maintainer: Daniel Baumann Architecture: amd64 Source: dosfstools Version: 3.0.25-1 Depends: dosfstools (= 3.0.25-1) Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-dbg_3.0.25-1_amd64.deb Size: 153466 MD5sum: f768cab4a9ece4376ef679855296bb9c SHA1: d15f22bb9158cd4d8b291406de202a2b8010a370 SHA256: 36155dc06ef3a1b23c625ca14bb99157721521b19753926c6b135147f9f7f0c0 SHA512: 4c51cc6265713b2bfa26ad2557ddd26431994e6951ae465d636599452fef7d0d1da779d2f3262398fed0bac067caed49c52bd077820e76852b9a99bad1c35ed5 Description: utilities for making and checking MS-DOS FAT filesystems (debug) The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. . This package contains the debugging symbols. Homepage: http://daniel-baumann.ch/software/dosfstools/ Package: dosfstools-dbg Priority: extra Section: debug Installed-Size: 211 Maintainer: Daniel Baumann Architecture: i386 Source: dosfstools Version: 3.0.25-1 Depends: dosfstools (= 3.0.25-1) Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-dbg_3.0.25-1_i386.deb Size: 146878 MD5sum: b65856701bb28c7c3a3b01725ea49544 SHA1: c3ba5b7ca7281ae62997170563ef2db9121fbd35 SHA256: 772ca9058652d3b8e92b82361ef0fc8fa2fe7cebd1ab81674b71be971ed45d7e SHA512: b5aaa46309a7e5383d3bc9c7fe1dfa5b2f8a0a003d9e67edcaed1adf9bab636eb1c3a9e65b081beee86d8431ff2f5c8090765ebcdbc510eefba2fabcecae8991 Description: utilities for making and checking MS-DOS FAT filesystems (debug) The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. . This package contains the debugging symbols. Homepage: http://daniel-baumann.ch/software/dosfstools/ Package: dosfstools-udeb Priority: optional Section: debian-installer Installed-Size: 133 Maintainer: Daniel Baumann Architecture: amd64 Source: dosfstools Version: 3.0.25-1 Depends: libc6-udeb (>= 2.17) Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-udeb_3.0.25-1_amd64.udeb Size: 38608 MD5sum: b59f7eaf05dd5dc7c0967e8ecf5999cc SHA1: bf32cb376dcea09f31754e16880ae61a1ef43d33 SHA256: f8ba1175fd686ddbfe47fb1a68134abb9c56ca00265bc1e0ef3c80a66109faa8 SHA512: 3021057debb6d8a5152ed4d30699be4d50388d136194a2d997655f498001466e08a14993c0c282715d53f4508ffb7d341f308a3677ca0b56dbf574a20210b690 Description: utilities for making and checking MS-DOS FAT filesystems (udeb) Package: dosfstools-udeb Priority: optional Section: debian-installer Installed-Size: 146 Maintainer: Daniel Baumann Architecture: i386 Source: dosfstools Version: 3.0.25-1 Depends: libc6-udeb (>= 2.17) Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-udeb_3.0.25-1_i386.udeb Size: 38408 MD5sum: 3e5593dc4530925ee84587e1e98753ad SHA1: 1256a81af9a4080e9a43b7a26f29a5b9d5139844 SHA256: f0cbaadfd1f0075ad81da314d64158a5538b7262dac5340f71a24292d635103f SHA512: 197aa54cac7666dd993d9d88fdaa4624807da2de659fdec635197bdc9a5216fd74558f1e9513401fb457b43249a0afa0f36ed5277d66389c8218f61f7c9b2d7a Description: utilities for making and checking MS-DOS FAT filesystems (udeb) Package: dosfstools Priority: optional Section: otherosfs Installed-Size: 183 Maintainer: Daniel Baumann Architecture: amd64 Version: 3.0.25-1 Depends: libc6 (>= 2.14) Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools_3.0.25-1_amd64.deb Size: 83830 MD5sum: 38c20cd4f9bb97ec2511ec8a3e7790b1 SHA1: 5da0a7e1a9aca7e998c5a2b4f305afd9f061a132 SHA256: 5efec66e67b401474196fb8bc20458d7c50e64a6fc1a4bc341a8268a0d8f55cd SHA512: e41637dcd0752a47c9e568b3aca59fa51d7da86a8fcead966cfff9c67379fb72544776607317c9f8fda6716714fad0f87ec5e51bed8e11e34ec97c22cf058ddf Description: utilities for making and checking MS-DOS FAT filesystems The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. Homepage: http://daniel-baumann.ch/software/dosfstools/ Package: dosfstools Priority: optional Section: otherosfs Installed-Size: 227 Maintainer: Daniel Baumann Architecture: i386 Version: 3.0.25-1 Depends: libc6 (>= 2.7) Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools_3.0.25-1_i386.deb Size: 83906 MD5sum: b366377a801085403de59f85ccbde41f SHA1: 79ae9005361cb8b68fe82230a48883a6e91b071d SHA256: 76fdae000d946f49218ca4fad9e0110cf4fbf75189a7476a28216af1d66a48fa SHA512: eea738ad09a769210c5acc3bf7923c45c0b47f8b1b9d40921bc46f053a90686a6aa21f21929f2c51dbcdb111319393cc1a643ea434b1d65a9b0b869bd0d66199 Description: utilities for making and checking MS-DOS FAT filesystems The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. Homepage: http://daniel-baumann.ch/software/dosfstools/ Package: gdisk-noicu Priority: extra Section: oldlibs Installed-Size: 28 Maintainer: Guillaume Delacour Architecture: all Source: gdisk Version: 1.0.0-drbl1 Depends: gdisk Filename: pool/drbl/live-ubuntu-experimental/gdisk/gdisk-noicu_1.0.0-drbl1_all.deb Size: 4442 MD5sum: c2cd96550fa6bd63f733920fd5c4de08 SHA1: 02d2f811a27d2d79d77f406c1c7aee3ace3e041a SHA256: 64a18a879cc4c49b0ffa7e03b430b96b1030f0270a061d3a5e1b165da14f6682 SHA512: ecb6f0e617f1972ae38406b937dd73b1b44ba3e37f078ca14ef8c31d380ba37258b59034aaca3ddc0138fe620e99ae33d46924afd5397a7fd527f1bfd0dff647 Description: transitional dummy package This is a transitional dummy package. It can safely be removed. Homepage: http://sourceforge.net/projects/gptfdisk/ Package: gdisk Priority: extra Section: admin Installed-Size: 799 Maintainer: Guillaume Delacour Architecture: amd64 Version: 1.0.0-drbl1 Replaces: gdisk-noicu (<< 0.8.10-1~) Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libpopt0 (>= 1.14), libstdc++6 (>= 4.9), libtinfo5, libuuid1 (>= 2.16) Recommends: groff-base Breaks: gdisk-noicu (<< 0.8.10-1~) Filename: pool/drbl/live-ubuntu-experimental/gdisk/gdisk_1.0.0-drbl1_amd64.deb Size: 198442 MD5sum: 94988219662fd47d9e775da18bb2e54a SHA1: e718b9ac6d4426fc476d275ee689f4c7affbea8c SHA256: 428a3c6250d29e5fbd29978b9aba16a773edbf2489d462e047f1be994c9e5ab8 SHA512: 9ac4f74407f192d893b294a95f81d9e6238c7bb4ec26f94807ceb3fabb9839f270a550ceb95d5a1a9abccd999aa1c5b0bf881eb14f177f52a49973e69a3bb153 Description: GPT fdisk text-mode partitioning tool GPT fdisk (aka gdisk) is a text-mode partitioning tool that works on Globally Unique Identifier (GUID) Partition Table (GPT) disks, rather than on the more common (through 2009) Master Boot Record (MBR) partition tables. . Please note that gdisk is still in beta version. Homepage: http://sourceforge.net/projects/gptfdisk/ Package: gdisk Priority: extra Section: admin Installed-Size: 856 Maintainer: Guillaume Delacour Architecture: i386 Version: 1.0.0-drbl1 Replaces: gdisk-noicu (<< 0.8.10-1~) Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libpopt0 (>= 1.14), libstdc++6 (>= 4.9), libtinfo5, libuuid1 (>= 2.16) Recommends: groff-base Breaks: gdisk-noicu (<< 0.8.10-1~) Filename: pool/drbl/live-ubuntu-experimental/gdisk/gdisk_1.0.0-drbl1_i386.deb Size: 209138 MD5sum: 6b796e6c506e9bac841d77b2bcf5d89c SHA1: bcbb82636c2914b6f5d758302cbc277d687fa7ea SHA256: c7f794586f023079b1ef110124752d71da35aaef96a3dab3542c0253ba548c41 SHA512: a144a122ce86625cfabee54b6f9b4bf1d65b5e70e24963e7527a8fdf6bd15eac24b9fd787e13fae5459d9598110222a25cafca52fe1528bcf1731b9862fe3174 Description: GPT fdisk text-mode partitioning tool GPT fdisk (aka gdisk) is a text-mode partitioning tool that works on Globally Unique Identifier (GUID) Partition Table (GPT) disks, rather than on the more common (through 2009) Master Boot Record (MBR) partition tables. . Please note that gdisk is still in beta version. Homepage: http://sourceforge.net/projects/gptfdisk/ Package: gparted-dbgsym Priority: extra Section: debug Installed-Size: 5317 Maintainer: Phillip Susi Architecture: amd64 Source: gparted Version: 0.29.0-drbl1 Depends: gparted (= 0.29.0-drbl1) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.29.0-drbl1_amd64.deb Size: 5228874 MD5sum: f228b7b059637038a845535cc3ec921a SHA1: 1a169c9e7ffb2a5aa7de8f3477c6df97088efe77 SHA256: 7312ab64331fe827a260cc760b498d3c3ac088c955c4124429db6ec35d73f667 SHA512: 3529611f6cefc99bf204fe81f768895ddbd5a696dbc0c2f845aecda70fdac1ded95ecf728880923f52dafbcd36a0e94fd08a0d1d94655b67b8d26b946680951a Description: Debug symbols for gparted Auto-Built-Package: debug-symbols Build-Ids: 08c64de274acedc007b8be1d08d18b0d06aec4c3 Package: gparted Priority: optional Section: gnome Installed-Size: 4572 Maintainer: Phillip Susi Architecture: amd64 Version: 0.29.0-drbl1 Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16) Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart Breaks: udisks2 (<< 2.1.5) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.29.0-drbl1_amd64.deb Size: 1051716 MD5sum: a7c66510571eb036d0cc62fb4dbdffa8 SHA1: 9b568aafdf02ac7a1e263377806d6079e2830dec SHA256: 2a9202e8a035cdabeef5e1c3f0171d0d3681fa0d0da2036d62846330eed75be3 SHA512: 6ef8ccea267edef924aee563a40688f167bce10d98b807fc746ff62c472d7806e80e541acbb6b1c5c35ab473a274adf222a6812095ececcf6e147b05ddcdadae Description: GNOME partition editor GParted uses libparted to detect and manipulate devices and partition tables while several (optional) filesystem tools provide support for filesystems not included in libparted. Homepage: http://gparted.sourceforge.net Package: gparted-dbgsym Priority: extra Section: debug Installed-Size: 5141 Maintainer: Phillip Susi Architecture: i386 Source: gparted Version: 0.29.0-drbl1 Depends: gparted (= 0.29.0-drbl1) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.29.0-drbl1_i386.deb Size: 5078980 MD5sum: 0a367af6a8649a9b8a158058287f5852 SHA1: 69e4dbb8aa8de0c410944d93cb078337121849b5 SHA256: 91e1be087df006e6fc20171fa889bf16be41faebffd467ed2db1eadc9e0779c1 SHA512: e4b53fa2b1308c2dd85d946253e37173c370c8aaf31051259110ca8342bc2cf411be244a914f1c66e9c1dc1341cc2191da0502a774ee5f100309897a8aee2aca Description: Debug symbols for gparted Auto-Built-Package: debug-symbols Build-Ids: 4ecd11f90ce948553e501739c7f5fa1be072b940 Package: gparted Priority: optional Section: gnome Installed-Size: 4504 Maintainer: Phillip Susi Architecture: i386 Version: 0.29.0-drbl1 Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.4), libgcc1 (>= 1:4.2), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16) Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart Breaks: udisks2 (<< 2.1.5) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.29.0-drbl1_i386.deb Size: 1093830 MD5sum: 5c700d3f376ff630ecf170a8f7c27858 SHA1: cad7bf027d107746730fd9337b792a90c79113dd SHA256: 6ce56ec811a023fb3a6696bc12dd13a7f2a74514767dcf1a235fe1db7e76273a SHA512: c3366d2274ebf5236207fd661b8d0b19e24b69e579054396a09285a3efbad64a033e294714124f1f5a8d1fc91476919a3e39433834114adf46e1a5e50fc30907 Description: GNOME partition editor GParted uses libparted to detect and manipulate devices and partition tables while several (optional) filesystem tools provide support for filesystems not included in libparted. Homepage: http://gparted.sourceforge.net Package: gparted-dbgsym Priority: extra Section: debug Installed-Size: 5289 Maintainer: Phillip Susi Architecture: amd64 Source: gparted Version: 0.28.1-drbl1 Depends: gparted (= 0.28.1-drbl1) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.28.1-drbl1_amd64.deb Size: 5197414 MD5sum: 6e16c8600e6f2a87c87b9a0b64d7ae68 SHA1: 40ee493ec3e74852ec6af3b8040cd1a67b7b49b3 SHA256: 7ad260ed683ef652219c1fc1745df2c2024b4c72cf3a0d59d07a133fc963c51d SHA512: 47dc7b30b3fd18d82a4ebd15ffddcef4dae35ee8ed992427cf389014dd261edfbcbf935aa1ab21c6862564fa05bf8ff64fa1ee5791a300ce6db8166ab55a2fc4 Description: Debug symbols for gparted Auto-Built-Package: debug-symbols Homepage: http://gparted.sourceforge.net Build-Ids: 06818da11e7b62a3743d104e652283fb69a13bbb Package: gparted Priority: optional Section: gnome Installed-Size: 4557 Maintainer: Phillip Susi Architecture: amd64 Version: 0.28.1-drbl1 Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16) Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart Breaks: udisks2 (<< 2.1.5) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.28.1-drbl1_amd64.deb Size: 1032638 MD5sum: b8d66f50ccd7c55d671ca8ad99a8e7a7 SHA1: 50ca7deb499a4c682cf8dc77868b14de214c6381 SHA256: 21cf8b577d4117a771b1784dadfc5d5844756303a09a67c7905aaf9fb83960b6 SHA512: 973e727a00a1dd7e1c4bb89b99d7e976915c09fe0426831e0774eb09629cf7e3dc09e149adbc4eecd9908492f6649c4970410fe5c91e276c3d68d23623ccc26a Description: GNOME partition editor GParted uses libparted to detect and manipulate devices and partition tables while several (optional) filesystem tools provide support for filesystems not included in libparted. Homepage: http://gparted.sourceforge.net Package: gparted-dbgsym Priority: extra Section: debug Installed-Size: 5035 Maintainer: Phillip Susi Architecture: i386 Source: gparted Version: 0.28.1-drbl1 Depends: gparted (= 0.28.1-drbl1) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.28.1-drbl1_i386.deb Size: 4971686 MD5sum: 3ba2329abf8b05b1c90959cda0841ae4 SHA1: 3531534df28fc5ff2414d2ef3bb88c03c7d3f7e6 SHA256: 735a9a21fabe24de431839894d6fea77118ca298fb764d2d4decdd26669bc18f SHA512: dd94d0c308df2a945db6cd423a6005bd0bfe37d44bf29c7564ed038984ec0ce44da5042ebf5c0cc26bbf1fd8b718ab62455d62663280a2a52d206112ccd0697c Description: Debug symbols for gparted Auto-Built-Package: debug-symbols Homepage: http://gparted.sourceforge.net Build-Ids: b29c231c0a5449b5ef29e5a576b3c3272aad31d0 Package: gparted Priority: optional Section: gnome Installed-Size: 4465 Maintainer: Phillip Susi Architecture: i386 Version: 0.28.1-drbl1 Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.4), libgcc1 (>= 1:4.2), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16) Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart Breaks: udisks2 (<< 2.1.5) Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.28.1-drbl1_i386.deb Size: 1069992 MD5sum: 49533cd166da39496535f83ec9db11ef SHA1: 459e55da1cfe01f3655668a1f6ac15770100b5df SHA256: b94cd7066daaa996f6dbbd019ddd92868f47241641559adec2972119f8c558ab SHA512: 4e078deb24aeb648a821aa1a766460fc265c16e444262154b99b47d39623e5c5eb04c6400c010bd7f4cc69f63cc56706a07e6c00638e55d0acfc72bf7393a820 Description: GNOME partition editor GParted uses libparted to detect and manipulate devices and partition tables while several (optional) filesystem tools provide support for filesystems not included in libparted. Homepage: http://gparted.sourceforge.net Package: jfbterm-dbgsym Priority: extra Section: debug Installed-Size: 118 Maintainer: Debian QA Group Architecture: amd64 Source: jfbterm Version: 0.4.7-9.5drbl Depends: jfbterm (= 0.4.7-9.5drbl) Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.5drbl_amd64.deb Size: 95484 MD5sum: 00e256e81eeecf2196d24fe040c53936 SHA1: a3a70edf29af004f3779f2d1d89dac6276f0963f SHA256: 6df2c1de3d7353cbc90ac2d592e53314dcf6c9aea0f11a9167eec8e61b7db4f9 SHA512: 172366e59e29c36c7248fc1c2d21d8ce9b00907782ea28d584f7c9913f8b00ae5cae3e9981159b1b245fd63f1b03d142a89c6f8c0141b430c5d6e18ba0fe17b0 Description: Debug symbols for jfbterm Auto-Built-Package: debug-symbols Homepage: http://jfbterm.sourceforge.jp/ Build-Ids: 30d74be0618ba478887ae3ed470efe9bdd5e868e Package: jfbterm Priority: optional Section: utils Installed-Size: 139 Maintainer: Debian QA Group Architecture: amd64 Version: 0.4.7-9.5drbl Depends: libc6 (>= 2.15), unifont Suggests: xfonts-base Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.5drbl_amd64.deb Size: 55628 MD5sum: 530be2de30f5d62a1384670030c1704b SHA1: 1445d8ddf750b2374f2efc4705e7da15b54c2a74 SHA256: 5e7d058173ed0595f23af35e3e038021a3a3f925aae48034d79b6c964e3758b2 SHA512: 6f7bd66c1f15947c746bb4865f374174cefb380bb8ece200a2ed21950cd0c2e25aa95a1b87db8547dac38a9be526e6d32c4b7c123d762732a308fd95dc786e5f Description: multilingual terminal on Linux framebuffer Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display multilingual text on Linux framebuffer. It can display ISO-2022 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP, EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB). It also supports UTF-8, and other coding system such as SHIFT_JIS by using iconv(3). . It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp PACKED-PIXELS TRUECOLOR framebuffers. It also supports 1bpp, 2bpp, (and vga16fb on arch i386). Homepage: http://jfbterm.sourceforge.jp/ Package: jfbterm-dbgsym Priority: extra Section: debug Installed-Size: 103 Maintainer: Debian QA Group Architecture: i386 Source: jfbterm Version: 0.4.7-9.5drbl Depends: jfbterm (= 0.4.7-9.5drbl) Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.5drbl_i386.deb Size: 82674 MD5sum: c0bcbb7bbdb364ac60ceebe8ff7fb0eb SHA1: ec514ee8063ba812b668caa669b49ea77e5a3ef4 SHA256: 75b070bad98abeacdd215d96889cb4dbbd3503fcfc4c9ca9327228c604a53c65 SHA512: 18dcac8d7eb90823fb2a6671d00c6811a2df2d31167395476aae1accaf221eceff9e54eff694d1d2fe0d7f9edfa444074d9a52509c7b7ee64fc042e81fbd5ef2 Description: Debug symbols for jfbterm Auto-Built-Package: debug-symbols Homepage: http://jfbterm.sourceforge.jp/ Build-Ids: c406ebce5fea253c857aabd4ebe38bde8dddf4a4 Package: jfbterm Priority: optional Section: utils Installed-Size: 135 Maintainer: Debian QA Group Architecture: i386 Version: 0.4.7-9.5drbl Depends: libc6 (>= 2.15), unifont Suggests: xfonts-base Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.5drbl_i386.deb Size: 57618 MD5sum: 524bbf08541024b728c49d4a802fe029 SHA1: a367d20dde7a110c7287980bc1b0426dc11d9d9d SHA256: d3cf11290a12241b43ca3548ab0205a64dfe8d614d48d71081567ed9130649ac SHA512: 19491a755d641565fd9303dabdc9a6051ee1293e09ab71414fab976c3e8049db1aa3c4f677c4b36f7ede7faf4b08eaa40c397e45373ab94f516f9fe586447270 Description: multilingual terminal on Linux framebuffer Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display multilingual text on Linux framebuffer. It can display ISO-2022 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP, EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB). It also supports UTF-8, and other coding system such as SHIFT_JIS by using iconv(3). . It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp PACKED-PIXELS TRUECOLOR framebuffers. It also supports 1bpp, 2bpp, (and vga16fb on arch i386). Homepage: http://jfbterm.sourceforge.jp/ Package: jfbterm-dbgsym Priority: extra Section: debug Installed-Size: 118 Maintainer: Debian QA Group Architecture: amd64 Source: jfbterm Version: 0.4.7-9.6drbl Depends: jfbterm (= 0.4.7-9.6drbl) Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.6drbl_amd64.deb Size: 95470 MD5sum: 45ca770de206fe6ae0e07e4fbbf44929 SHA1: e750484881b8b388bbf1509280bd7b07eedb8e3e SHA256: e5a2648be5d5c6b2a9272adcf35f5cef982a13c54c1b60eae369671f9aa32fe7 SHA512: dacb9d2f445021ed349cd70f8da62ea6b159868e101b47b7f047cdcb09096cb1ec43f2655c03ea540c7d7eada4a6a52add44212f927f97e6148a9dbba32926d6 Description: Debug symbols for jfbterm Auto-Built-Package: debug-symbols Homepage: http://jfbterm.sourceforge.jp/ Build-Ids: 30d74be0618ba478887ae3ed470efe9bdd5e868e Package: jfbterm Priority: optional Section: utils Installed-Size: 173 Maintainer: Debian QA Group Architecture: amd64 Version: 0.4.7-9.2drbl Depends: libc6 (>= 2.15), unifont Suggests: xfonts-base Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.2drbl_amd64.deb Size: 53216 MD5sum: c6a1d205eb1598a3abf4bdc7ea2f44ce SHA1: 77fa10e78b5feb9dbde40472f91fbc061095e457 SHA256: a0d249bccb1cb9421cdae547b604c9afb688ceee7a2c1d6cba69bcbe63181802 SHA512: cc018994aeb6de2773926d3b5d9e3248e787b349ae925fbd7f8e51483171b56f2503b339464cce2998db7452fe759fbee13db4d5a6c6bd2754f61bde0ed3ba51 Description: multilingual terminal on Linux framebuffer Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display multilingual text on Linux framebuffer. It can display ISO-2022 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP, EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB). It also supports UTF-8, and other coding system such as SHIFT_JIS by using iconv(3). . It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp PACKED-PIXELS TRUECOLOR framebuffers. It also supports 1bpp, 2bpp, (and vga16fb on arch i386). Homepage: http://jfbterm.sourceforge.jp/ Package: jfbterm Priority: optional Section: utils Installed-Size: 169 Maintainer: Debian QA Group Architecture: i386 Version: 0.4.7-9.2drbl Depends: libc6 (>= 2.15), unifont Suggests: xfonts-base Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.2drbl_i386.deb Size: 53120 MD5sum: a8dca18b308508c1ce902957b6d04e23 SHA1: 45001c9603556977c649e83d3584989856b55214 SHA256: 3d3a2c3b4a54100bbca297b1fe436a8f172c1b59cac355842bfadfa8b2c9d3e1 SHA512: dd310061feebe3fb46aa1137fc0ffd81e57190054077d6aeff6c1b455d702dc6134b4f2ac5749faa8e1fe311ee7c22b2794656e18803db0e9e420b64e3db0070 Description: multilingual terminal on Linux framebuffer Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display multilingual text on Linux framebuffer. It can display ISO-2022 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP, EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB). It also supports UTF-8, and other coding system such as SHIFT_JIS by using iconv(3). . It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp PACKED-PIXELS TRUECOLOR framebuffers. It also supports 1bpp, 2bpp, (and vga16fb on arch i386). Homepage: http://jfbterm.sourceforge.jp/ Package: jfbterm Priority: optional Section: utils Installed-Size: 139 Maintainer: Debian QA Group Architecture: amd64 Version: 0.4.7-9.6drbl Depends: libc6 (>= 2.15), unifont Suggests: xfonts-base Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.6drbl_amd64.deb Size: 55794 MD5sum: 192d9621e5bda5986f18046debaf3fd0 SHA1: 0db0e9cc295a9d6ed87c17451cd40a56e08b1661 SHA256: 01c333baa9a26db2c43c12fb9962f2175151c3acd5e05f671964d47deacdef38 SHA512: 94374b3796df509a770c1e7585a5e55c941b1bb56ac2cfc17d989afaa21aa100b5bc62695c0512ac9067a68e9c7851a8b0c3360b663bcca199be95f85db0e079 Description: multilingual terminal on Linux framebuffer Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display multilingual text on Linux framebuffer. It can display ISO-2022 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP, EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB). It also supports UTF-8, and other coding system such as SHIFT_JIS by using iconv(3). . It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp PACKED-PIXELS TRUECOLOR framebuffers. It also supports 1bpp, 2bpp, (and vga16fb on arch i386). Homepage: http://jfbterm.sourceforge.jp/ Package: jfbterm-dbgsym Priority: extra Section: debug Installed-Size: 103 Maintainer: Debian QA Group Architecture: i386 Source: jfbterm Version: 0.4.7-9.6drbl Depends: jfbterm (= 0.4.7-9.6drbl) Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.6drbl_i386.deb Size: 82668 MD5sum: 72d3ccf234377534b6ced68c42d0280d SHA1: 9c90f434813c8d309b85c44c37db98c39eb1dd07 SHA256: 221f853075f376ec81ed76758620c6c0803078e2ee2e385c9bd3e83ab0f15911 SHA512: 6b5ea07352c9aa7e9ed8b294cbf8c4678607db81ca085f9c4a965c8360a49a9d615c861bafe01aa817651abab5bf59f8e2808a22f0e72cc5b7970fb8b444ff45 Description: Debug symbols for jfbterm Auto-Built-Package: debug-symbols Homepage: http://jfbterm.sourceforge.jp/ Build-Ids: c406ebce5fea253c857aabd4ebe38bde8dddf4a4 Package: jfbterm Priority: optional Section: utils Installed-Size: 135 Maintainer: Debian QA Group Architecture: i386 Version: 0.4.7-9.6drbl Depends: libc6 (>= 2.15), unifont Suggests: xfonts-base Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.6drbl_i386.deb Size: 57652 MD5sum: 94a9944f4b0dc32e7939b1c97e02d8d1 SHA1: ea8ef0e93abae2997f5c630550b7dd7febeb5f93 SHA256: a488f9fe76dd3f66299165077f5e12fa0afa62d621f322b8356894171cdea5a3 SHA512: c6cf6def7ea1507e36909b2e3ef3558534ff84a55aa16582a5508646777b3ffe51a0284278f010a8636cb7214293a8e7a6160028b4c15d2faa06d24390a269e9 Description: multilingual terminal on Linux framebuffer Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display multilingual text on Linux framebuffer. It can display ISO-2022 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP, EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB). It also supports UTF-8, and other coding system such as SHIFT_JIS by using iconv(3). . It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp PACKED-PIXELS TRUECOLOR framebuffers. It also supports 1bpp, 2bpp, (and vga16fb on arch i386). Homepage: http://jfbterm.sourceforge.jp/ Package: live-boot-initramfs-tools Priority: optional Section: misc Installed-Size: 34 Maintainer: Live Systems Maintainers Architecture: all Source: live-boot Version: 4.0.2-1.drbl15 Replaces: live-boot-backend Provides: live-boot-backend Depends: busybox | busybox-initramfs, initramfs-tools, udev Conflicts: live-boot-backend Filename: pool/drbl/live-ubuntu-experimental/live-boot/live-boot-initramfs-tools_4.0.2-1.drbl15_all.deb Size: 30648 MD5sum: 8c8d1f73e6bd123b3ed978e4165a494a SHA1: d711dc5017f2f0f15c6612f5fbe19bdf656af6d7 SHA256: e55d5e902fcbd5efea8328c1c531f82c818b324cde29dac165c71cd0cb05f8e9 SHA512: 6c2071e5bf6825e9dd1935348f48f504aee4692cc2534ea1a9665abe32f2ae9a4c8b593711808052211b0586d80880a005934079ed425efbda235c8662ed6761 Description: Live System Boot Components (initramfs-tools backend) The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-boot contains the components to configure a live system during the boot process (early userspace). . This package contains the initramfs-tools backend. Homepage: http://live-systems.org/devel/live-boot/ Package: live-boot-doc Priority: optional Section: doc Installed-Size: 56 Maintainer: Live Systems Maintainers Architecture: all Source: live-boot Version: 4.0.2-1.drbl15 Filename: pool/drbl/live-ubuntu-experimental/live-boot/live-boot-doc_4.0.2-1.drbl15_all.deb Size: 56950 MD5sum: 5e81ec2ba9ca5207467c67cbc60b25c4 SHA1: 49dfd98475f70a266293090eb9deb284f3a1442c SHA256: b1c6a7c4733b3bce3c53a6d7700ca3e72c4a7240e4b68f29ff2e090fa8ffe1b3 SHA512: c641caa55e9d790eaf909218824419e6bf20f0df5be88c0c0279f85f9d5811e7a50858ad65a4084658ecc69ef8a739d70fa406c8a6330e1e9b594583479dec13 Description: Live System Boot Components (documentation) The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-boot contains the components to configure a live system during the boot process (early userspace). . This package contains the documentation. Homepage: http://live-systems.org/devel/live-boot/ Package: live-boot Priority: optional Section: misc Installed-Size: 120 Maintainer: Live Systems Maintainers Architecture: all Version: 4.0.2-1.drbl15 Depends: live-boot-initramfs-tools | live-boot-backend Recommends: live-boot-doc, live-tools, rsync, uuid-runtime Suggests: curlftpfs, cryptsetup, httpfs2, unionfs-fuse, wget Filename: pool/drbl/live-ubuntu-experimental/live-boot/live-boot_4.0.2-1.drbl15_all.deb Size: 54806 MD5sum: 2acb0da8c0176365a538690d425dc84e SHA1: d1f8c24c505f938e7127550b713d2dea6e459624 SHA256: f8a8193679785d8c7353b77e51569ec66d2fbf63c2340d3e4a1dfde3cf16b67c SHA512: 9cec182c80ee05205fd2ec8f41104553f8c66e16484a83b0e8c9f08cf2388f6e17999d348b8f8133381d7d69435934596d0c3e777a23aa75358ef3c4894d2d2c Description: Live System Boot Components The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-boot contains the components to configure a live system during the boot process (early userspace). . In addition to live-boot, a backend for the initrd generation is required, such as live-boot-initramfs-tools. Homepage: http://live-systems.org/devel/live-boot/ Package: live-build-cgi Priority: optional Section: misc Installed-Size: 84 Maintainer: Live Systems Maintainers Architecture: all Source: live-build Version: 4.0.5-1.drbl3 Depends: live-build (= 4.0.5-1.drbl3) Recommends: apache2 | httpd, cron Filename: pool/drbl/live-ubuntu-experimental/live-build/live-build-cgi_4.0.5-1.drbl3_all.deb Size: 73448 MD5sum: cda79b4572bb67195562b39fcd64a35f SHA1: 4382ee0ea021609c711eae289b37501cb0ed1d6f SHA256: f2c2de6309ac6ea7964b53a2ce8346ca02f511be3162967372e0e154d5fd4a3d SHA512: 4ae36cbe5712637c0f2f5366da1aa8fda42c61f7b059d13a13c6c97d0d914e64667a26fab0261cf7a064c4a27c101482326f17d52503fa947d1b2890599abdf7 Description: Live System Build Scripts (CGI frontend) The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-build contains the components to build a live system from a configuration directory. . This package contains the CGI frontend (experimental!). Homepage: http://live-systems.org/devel/live-build/ Package: live-build Priority: optional Section: misc Installed-Size: 717 Maintainer: Live Systems Maintainers Architecture: all Version: 4.0.5-1.drbl3 Depends: debootstrap | cdebootstrap | cdebootstrap-static Recommends: cpio, live-boot-doc, live-config-doc, live-manual-html | live-manual Filename: pool/drbl/live-ubuntu-experimental/live-build/live-build_4.0.5-1.drbl3_all.deb Size: 221586 MD5sum: 9a702951210f503688a714564c8f175a SHA1: f49029ffe299c98dd0d3f9460634720b2d8f84a4 SHA256: 14a3da553adcffcdd378081199da4c075d7e1e03c9a1fb094ec56454f29aeed8 SHA512: b50bcc3f1bc9ba4065a5cf0c31ac97477ac7e59681237998ea6ee0224d4dff49114ce2ca6abbc6f242274550109d5ea36d39162414c1e83eb2fcba6bf62feb29 Description: Live System Build Components The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-build contains the components to build a live system from a configuration directory. Homepage: http://live-systems.org/devel/live-build/ Package: live-config-doc Priority: optional Section: doc Installed-Size: 54 Maintainer: Live Systems Maintainers Architecture: all Source: live-config Version: 4.0.4-1.drbl7 Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-doc_4.0.4-1.drbl7_all.deb Size: 50712 MD5sum: 93babe2eb780a383e74aa6ee98c36d00 SHA1: 197e8fe1062423b8b74024d286558e7eac13fbc9 SHA256: b9f3dcb142bc4c00e1d1898c224f5afc3121203872a90e72824370a80f6caecc SHA512: 55ac6a2bff210f6ac34d7f1921def7850168771dd797abd168daa865be3c82cb0148caf1ee3c83feb832a14c476d9c5b9db785887ade69614b48855cdf07c8b3 Description: Live System Configuration Components (documentation) live-config contains the components that configure a live system during the boot process (late userspace). . This package contains the documentation. Homepage: http://live-systems.org/devel/live-config/ Package: live-config-systemd Priority: optional Section: misc Installed-Size: 20 Maintainer: Live Systems Maintainers Architecture: all Source: live-config Version: 4.0.4-1.drbl7 Replaces: live-config-backend Provides: live-config-backend Depends: systemd Recommends: dbus Conflicts: live-config-backend Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-systemd_4.0.4-1.drbl7_all.deb Size: 19240 MD5sum: 403457538f569ddfdd96d93593510954 SHA1: d7042307b7f3ee37a373c549992173ae5769ecef SHA256: 43ed801d240f08fab204bcd309cd438cfd43616d70b37e07bc5f502ed8a3ad20 SHA512: d5f98571e98872f98cd919779a79448dcf94ef3fe0a0489aaee205e1b2b54830ed58f173f0b91dccd14ac88408b01299d7829d10c38642add2b33c95b9f003dd Description: Live System Configuration Components (systemd backend) The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-config contains the components to configure a live system during the boot process (late userspace). . This package contains the systemd backend. Homepage: http://live-systems.org/devel/live-config/ Package: live-config-sysvinit Priority: optional Section: misc Installed-Size: 23 Maintainer: Live Systems Maintainers Architecture: all Source: live-config Version: 4.0.4-1.drbl7 Replaces: live-config-backend Provides: live-config-backend Depends: sysvinit-core | sysvinit (<< 2.88dsf-44) Conflicts: live-config-backend Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-sysvinit_4.0.4-1.drbl7_all.deb Size: 20674 MD5sum: c8ef740500f7375350888c356bf0b172 SHA1: 13c68c124df308654f313941bbb34a6ea383e680 SHA256: a90c28813e188a287e00c5a606e4deb4bf00651083f68476fbdd4fe14d32e7c3 SHA512: 842b5d709ecacfc4c45b1b72749310428e2ec243670b8fbe6cd68e167b551a25d060f89caa52d6656de85da36cfd19ee0fd2909cf2885c5fd0b10b5bb9ef49af Description: Live System Configuration Components (sysvinit backend) The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-config contains the components to configure a live system during the boot process (late userspace). . This package contains the sysvinit backend. Homepage: http://live-systems.org/devel/live-config/ Package: live-config-upstart Priority: optional Section: misc Installed-Size: 21 Maintainer: Live Systems Maintainers Architecture: all Source: live-config Version: 4.0.4-1.drbl7 Replaces: live-config-backend Provides: live-config-backend Depends: upstart Conflicts: live-config-backend Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-upstart_4.0.4-1.drbl7_all.deb Size: 19580 MD5sum: 703d00e02565d9ef279f49a5a5a6e704 SHA1: 45f5c2496b2dbe9caf778342c55df13ef51df380 SHA256: e8514f16b56ad03d02384cef6838d908e7fad2b79bc2e013c5db62958f76f856 SHA512: f9720290a05e49136c2fefea7c333b1ebed68a650f78bf7149cd50818d79a586ec77528630e2440b716b894063be58176f0c41de054fc87acb2782cfbf9a8ae9 Description: Live System Configuration Scripts (upstart backend) live-config contains the scripts that configure a live system during the boot process (late userspace). . This package contains the upstart backend (experimental!). Homepage: http://live-systems.org/devel/live-config/ Package: live-config Priority: optional Section: misc Installed-Size: 85 Maintainer: Live Systems Maintainers Architecture: all Version: 4.0.4-1.drbl7 Depends: live-config-sysvinit | live-config-backend Recommends: live-config-doc, live-tools, iproute2 | iproute, keyboard-configuration, locales | locales-all, user-setup, sudo Suggests: pciutils, wget Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config_4.0.4-1.drbl7_all.deb Size: 31268 MD5sum: 519870f8e0b29d9f218c459f9d8de166 SHA1: ad2f6227a859d160906e3cfae9f2e4782ebadb5f SHA256: 3cb4fad71730cc5cc2cfcd301925583e4af3b4babb718b2a5ca11f3478e4bd52 SHA512: 5572e97e3e6dcee1904b540f0ed6bf2dbb8fffa99c7d39c8a3f3fc4eea72e6f5cb2316ea4ca6bf7eb0f3e828315fdbc01e7b7b99b966fe35c960096751b85656 Description: Live System Configuration Components The Live Systems project maintains the components to build Debian based Live systems and the official Debian Live images themselves. . live-config contains the components to configure a live system during the boot process (late userspace). . In addition to live-config, a backend for an init system is required, such as live-config-sysvinit. Homepage: http://live-systems.org/devel/live-config/ Package: partclone-utils Priority: optional Section: utils Installed-Size: 120 Maintainer: Steven Shiau Architecture: amd64 Version: 0.4.1-drbl1 Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10) Filename: pool/drbl/live-ubuntu-experimental/partclone-utils/partclone-utils_0.4.1-drbl1_amd64.deb Size: 25634 MD5sum: 160586f4b8e1908a6d87039d9a63d0d5 SHA1: 241320ae1e0bd19d47f5eb2c32c6735ef38b1ad3 SHA256: ac53116066dcb5e04253929646d220223bca5f8004ac63794df7e6033951647f SHA512: 01858036fbcc01a3b4152a8e47ebc4d71b60a10541bd2310d4bf3df14f3ccfbe97c222c3aca0a4ef0147bf46ee216b1180a6368ea46ed9bfe712b6e9fea856d7 Description: A utility that creates and optionally mounts a partclone image. Using imagemount, you can create a network block device that reads blocks from the partclone image. Optionally, you can enable write support so that written changes are saved to a change file so that the original image remains unchanged. Further, imagemount can also issue the mount(2) and umount[2](2) syscalls to mount and unmount the block device in the filesystem. Homepage: http://www.idealworldinc.com/partclone-utils/ Package: partclone-utils Priority: optional Section: utils Installed-Size: 92 Maintainer: Steven Shiau Architecture: i386 Version: 0.4.1-drbl1 Depends: libc6 (>= 2.7), libcap2 (>= 1:2.10) Filename: pool/drbl/live-ubuntu-experimental/partclone-utils/partclone-utils_0.4.1-drbl1_i386.deb Size: 29646 MD5sum: a52a596b27ffced21d8b20e27d5aa23a SHA1: d39fec3fae831b6717a161bbc36d96ea7d965541 SHA256: c1054a7c4a37eb2509d782d719d002eaa9c33c47854a59205323573af62994c9 SHA512: 1821b8735ba34b22b8735eb76e15556a38453406e6ef464da14c30d8d3ced9a8c79d7ca66a3367bfecac556b02097f6c8bac13a85cfc95fb76c4054b4dc4e4d5 Description: A utility that creates and optionally mounts a partclone image. Using imagemount, you can create a network block device that reads blocks from the partclone image. Optionally, you can enable write support so that written changes are saved to a change file so that the original image remains unchanged. Further, imagemount can also issue the mount(2) and umount[2](2) syscalls to mount and unmount the block device in the filesystem. Homepage: http://www.idealworldinc.com/partclone-utils/ Package: pbzip2 Priority: optional Section: utils Installed-Size: 788 Maintainer: Anibal Monsalve Salazar Architecture: i386 Version: 1.1.5-1drbl Filename: pool/drbl/live-ubuntu-experimental/pbzip2/pbzip2_1.1.5-1drbl_i386.deb Size: 361390 MD5sum: e138e61e1100c5d12965b0f8ba9596c7 SHA1: 0d813e3bac8a21dd040dc0016177ed78a40681da SHA256: a466d591729b4f160ac32dd054281f6fb4fe0d3910fed2d1b92153c4f5a30698 SHA512: 5427dbc20447bb004812738db745e8503e312615d326e095522058376053870e7a33e89d0d816a17c43868f4fb2dd164a3fb66f141da03ea24bb6371e767f06c Description: parallel bzip2 implementation pbzip2 is a parallel implementation of the bzip2 block-sorting file compressor that uses pthreads and achieves near-linear speedup on SMP machines. The output of this version is fully compatible with bzip2 v1.0.2 (ie: anything compressed with pbzip2 can be decompressed with bzip2). Homepage: http://compression.ca/pbzip2/ Package: plzip Priority: extra Section: utils Installed-Size: 200 Maintainer: Eduard Bloch Architecture: amd64 Version: 0.5-1drbl Depends: libc6 (>= 2.3.2), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Filename: pool/drbl/live-ubuntu-experimental/plzip/plzip_0.5-1drbl_amd64.deb Size: 65612 MD5sum: 588194116c2e074a3f284d885d5f6079 SHA1: 60826a2f837d6171eea9dd32b0166899e5c1e56d SHA256: 1e61c8ecfc38335021f0c680d1103f765aee0f5489f17852fb37d5b0dedb82fc SHA512: 676bccaa59967e565fba64e171304fc6c7c311db17bbb3d538083f99d7b330fe9dd2e2ec1b636753b97b2c57abc69cc37d79faabd8d062b8b5b3342219d4963b Description: Parallel Implementation of Lzip Plzip is a massively parallel (multi-threaded), lossless data compressor based on the LZMA algorithm, with very safe integrity checking and a user interface similar to the one of gzip or bzip2. Plzip uses the lzip file format; the files produced by plzip are fully compatible with lzip-1.4 or newer. . Plzip is intended for faster compression/decompression of big files on multiprocessor machines, which makes it specially well suited for distribution of big software files and large scale data archiving. On files big enough, plzip can use hundreds of processors. Homepage: http://www.nongnu.org/lzip/plzip.html Package: plzip Priority: extra Section: utils Installed-Size: 148 Maintainer: Eduard Bloch Architecture: i386 Version: 0.5-1drbl Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Filename: pool/drbl/live-ubuntu-experimental/plzip/plzip_0.5-1drbl_i386.deb Size: 63236 MD5sum: 58514ed79e2624405f16676b63e7e764 SHA1: 7d6a8fb1ed6963fbc99256c5696e0ab073cf9000 SHA256: 1c8a69380da5119b0a4fee50347f2197acef1a2fc5b1ea4195ac7c900dd58e9c SHA512: 94737cd94ec40daa42cf1789479ce14c849ecb22c985d68c4e6f68fb38ecd4b617b0350ce81d163f413c921ed95b4dd6ffc27c414b2b1fcdacba817e07f348a4 Description: Parallel Implementation of Lzip Plzip is a massively parallel (multi-threaded), lossless data compressor based on the LZMA algorithm, with very safe integrity checking and a user interface similar to the one of gzip or bzip2. Plzip uses the lzip file format; the files produced by plzip are fully compatible with lzip-1.4 or newer. . Plzip is intended for faster compression/decompression of big files on multiprocessor machines, which makes it specially well suited for distribution of big software files and large scale data archiving. On files big enough, plzip can use hundreds of processors. Homepage: http://www.nongnu.org/lzip/plzip.html Package: pxz Priority: optional Section: misc Installed-Size: 58 Maintainer: Ubuntu Developers Original-Maintainer: Holger Levsen Architecture: amd64 Version: 4.999.99~beta2+git4774800-1 Depends: libc6 (>= 2.3.4), libgomp1 (>= 4.2.1), liblzma5 (>= 5.1.1alpha+20120614) Filename: pool/drbl/live-ubuntu-experimental/pxz/pxz_4.999.99~beta2+git4774800-1_amd64.deb Size: 10394 MD5sum: 72458b2a35a4c151cd9b93f39dfa2d7e SHA1: e17a4e2106a3f04aa9bb831b538e736cbfe138a4 SHA256: 5bcba008207453a267bef8ae17e7f4182a8fa83469ef910cb056a1ec71f03ad3 SHA512: cc60c901a0b951336547ab552d01989c1b18022cfd957f11f20119cd48518420fdb5e95e2f38361bd0f3a989d7cc196205ae9e332de8c1ca8653a84251e6359c Description: parallel LZMA compressor using liblzma Parallel XZ is a compression utility that takes advantage of running LZMA compression of different parts of an input file on multiple cores and processors simultaneously. Its primary goal is to utilize all resources to speed up compression time with minimal possible influence on compression ratio. Homepage: http://jnovy.fedorapeople.org/pxz/ Package: pxz Priority: optional Section: misc Installed-Size: 57 Maintainer: Ubuntu Developers Original-Maintainer: Holger Levsen Architecture: i386 Version: 4.999.99~beta2+git4774800-1 Depends: libc6 (>= 2.7), libgomp1 (>= 4.2.1), liblzma5 (>= 5.1.1alpha+20120614) Filename: pool/drbl/live-ubuntu-experimental/pxz/pxz_4.999.99~beta2+git4774800-1_i386.deb Size: 11152 MD5sum: 28ed1d09bb8a259a349124a40285fd91 SHA1: d95b284e9a357455161fe590cf8d2bcc8d2ae82e SHA256: e6f8233b93ba83814688d77cc8a7ea0aef9c7d9df787586eb5adc6ba43e0476f SHA512: 509a2e79a50b80c6c73b7ada785ee1abbd5965c7fd12fd8e5d5f65eb845f4a757808ac40728eb5f5e7f9b666a59d11c5c1a4441839a1ab2c862338f681e1091a Description: parallel LZMA compressor using liblzma Parallel XZ is a compression utility that takes advantage of running LZMA compression of different parts of an input file on multiple cores and processors simultaneously. Its primary goal is to utilize all resources to speed up compression time with minimal possible influence on compression ratio. Homepage: http://jnovy.fedorapeople.org/pxz/ Package: gptsync Priority: optional Section: admin Installed-Size: 72 Maintainer: Julien BLACHE Architecture: amd64 Source: refit Version: 0.14-2 Replaces: refit Depends: libc6 (>= 2.2.5) Filename: pool/drbl/live-ubuntu-experimental/refit/gptsync_0.14-2_amd64.deb Size: 22578 MD5sum: 6398243d5d1bf33467553f4344fc4c2d SHA1: 1947929628b95b7f3edad69c3bf9146e14e245c1 SHA256: 9a7f16a2b7ca23b0d0986391c78aa87b55af6757993948dcba3e208b95274092 SHA512: 15ad30647d3a617c35054885c0d94de560e02f9483d2f49a69c9236f19bbeffce8cd58dfc5dd69dc642c8100a619b3f2321f47ca224e1048beca185026275e5d Description: GPT and MBR partition tables synchronisation tool gptsync is a utility to maintain an MBR partition table synchronised with a GPT partition table used as reference. The resulting MBR partition table can contain up to 4 partitions; extended partitions are not supported. . An MBR partition table is required to use legacy bootloaders (lilo, grub) on EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs. gptsync is usually used in combination with the rEFIt boot menu on such machines. Package: gptsync Priority: optional Section: admin Installed-Size: 104 Maintainer: Julien BLACHE Architecture: i386 Source: refit Version: 0.14-2 Replaces: refit Depends: libc6 (>= 2.2) Filename: pool/drbl/live-ubuntu-experimental/refit/gptsync_0.14-2_i386.deb Size: 21398 MD5sum: 8cb9e2e6a30754fcb95da574e03faa28 SHA1: 71a487632a007baa85902c0f4366aba3a2a3e1b4 SHA256: 095911d9c1767628fc2b7618b2b9cfcfc1bb085a39f803aa428b75f7172a6182 SHA512: 4352d7d9fffd068fed1f6cbcd02cafd8d5d3d994148bdf3cb7bd965dc3fb1f0aa2c797dc5ef4e6f4cc9eaffcaaff7faec79c90acd1bd9b49fb36d2d64ac5fa2b Description: GPT and MBR partition tables synchronisation tool gptsync is a utility to maintain an MBR partition table synchronised with a GPT partition table used as reference. The resulting MBR partition table can contain up to 4 partitions; extended partitions are not supported. . An MBR partition table is required to use legacy bootloaders (lilo, grub) on EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs. gptsync is usually used in combination with the rEFIt boot menu on such machines. Package: gptsync Priority: optional Section: admin Installed-Size: 84 Maintainer: Julien BLACHE Architecture: kfreebsd-amd64 Source: refit Version: 0.14-2 Replaces: refit Depends: libc0.1 (>= 2.3) Filename: pool/drbl/live-ubuntu-experimental/refit/gptsync_0.14-2_kfreebsd-amd64.deb Size: 22628 MD5sum: 6ebe7e7d30d63c542592d0bdcdf6abf0 SHA1: 7ab04682d4ced3537d2ec2292bf8118c6762c3dd SHA256: 4302b6eaa35bf7be72dc09e202d7f30ab938ff03264c9303afd7b57b76828e0a SHA512: d3789ddeaa9379067a7b26d15d35e50ca58d4f8cb5a4005e5ad3c868028bd6fcac5ab058133894e414db52c90444f147e2dd8f68f7c9571c4dc1df2637650da4 Description: GPT and MBR partition tables synchronisation tool gptsync is a utility to maintain an MBR partition table synchronised with a GPT partition table used as reference. The resulting MBR partition table can contain up to 4 partitions; extended partitions are not supported. . An MBR partition table is required to use legacy bootloaders (lilo, grub) on EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs. gptsync is usually used in combination with the rEFIt boot menu on such machines. Package: refit Priority: optional Section: admin Installed-Size: 1108 Maintainer: Julien BLACHE Architecture: amd64 Version: 0.14-2 Depends: gptsync Filename: pool/drbl/live-ubuntu-experimental/refit/refit_0.14-2_amd64.deb Size: 456254 MD5sum: f9863d4879df412c990bd31cd3fa62e6 SHA1: 26147f99bccb1bcd06342c7716031d0aa0169df2 SHA256: 3df10329cd4aa59bfd502a147b68b78fdb208cef57b9dd3474b62ba63f431166 SHA512: 6a59cd42e54eb4bf6ed13524adc7342cd64d4b0dee9459103c12091645e802fb60543e858a8b224d255d29c832596f9c36d8152a3a5bfe6f0a00a530a901cdd7 Description: graphical boot menu for ia32 and x64 EFI systems rEFIt is a boot menu and maintenance toolkit for EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs. You can use it to boot multiple operating systems easily, including triple-boot setups with Apple's Boot Camp. Package: refit Priority: optional Section: admin Installed-Size: 1172 Maintainer: Julien BLACHE Architecture: i386 Version: 0.14-2 Depends: gptsync Filename: pool/drbl/live-ubuntu-experimental/refit/refit_0.14-2_i386.deb Size: 456774 MD5sum: 8554a3f5e27667c6931d84ec4eba8b03 SHA1: de2abbd284c626edad22f4bae5f5d0abfee27c03 SHA256: 11852461de44fba796223cc611e7cd322d3d18aa47ddbd8a5002f9ed9a2ca3bf SHA512: b5454c53480a17b82b03994f4769374fdd17b46df60e8a73bacad0173fd21daf822a26379c6b7cdabbaf8f62ae8593c3540611a45fe047f87a647bb7b43d239d Description: graphical boot menu for ia32 and x64 EFI systems rEFIt is a boot menu and maintenance toolkit for EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs. You can use it to boot multiple operating systems easily, including triple-boot setups with Apple's Boot Camp. Package: refit Priority: optional Section: admin Installed-Size: 1100 Maintainer: Julien BLACHE Architecture: kfreebsd-amd64 Version: 0.14-2 Depends: gptsync Filename: pool/drbl/live-ubuntu-experimental/refit/refit_0.14-2_kfreebsd-amd64.deb Size: 449554 MD5sum: f30e8379505da50dd1c933e62a472ce2 SHA1: ef713a9acb9b8dcbd6fda1ba52d5ca6c69516166 SHA256: c6ccfdacb533453a11759ada2b432a67517bdf7a2bdbf186c1d565355f46d59e SHA512: 1bafd83f8f12356c1143be736ab287559c2ed15b55c4214758182e06ed9280ac871de77d358a1d0797b8268c7382ef852ebdf1d4e1ab0892c767f25e7f88ddc7 Description: graphical boot menu for ia32 and x64 EFI systems rEFIt is a boot menu and maintenance toolkit for EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs. You can use it to boot multiple operating systems easily, including triple-boot setups with Apple's Boot Camp. Package: tcplay Priority: optional Section: misc Installed-Size: 97 Maintainer: Steven Shiau Architecture: amd64 Version: 0.10-7.drbl1 Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.36), libgcrypt11 (>= 1.4.5), libssl1.0.0 (>= 1.0.0), libuuid1 (>= 2.16) Filename: pool/drbl/live-ubuntu-experimental/tcplay/tcplay_0.10-7.drbl1_amd64.deb Size: 29960 MD5sum: 58b91930233b9a478b163f080d6ea981 SHA1: 74f748804b99dcfb251bb0631d14a4a03b2b4839 SHA256: fb238e44b849cced48dc86c4e564c492fe53497fb79eab6a5cd2993ce2b61c3b SHA512: 14e117785715deabb49aa1d3ec508e83e211d713c2bfe7322ae80f4e72a29427434a2523adfb2789589ea4d8f468d0396775d2da2b314a49e49baeb02535d199 Description: create and open/map TrueCrypt-compatible volumes Tcplay is a free (BSD-licensed), pretty much fully featured (including multiple keyfiles, cipher cascades, etc) and stable TrueCrypt implementation. This implementation supports mapping (opening) both system and normal TrueCrypt volumes, as well as opening hidden volumes and opening an outer volume while protecting a hidden volume. There is also support to create volumes, including hidden volumes, etc. Homepage: https://github.com/bwalex/tc-play Package: tcplay Priority: optional Section: misc Installed-Size: 94 Maintainer: Steven Shiau Architecture: i386 Version: 0.10-7.drbl1 Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.36), libgcrypt11 (>= 1.4.5), libssl1.0.0 (>= 1.0.0), libuuid1 (>= 2.16) Filename: pool/drbl/live-ubuntu-experimental/tcplay/tcplay_0.10-7.drbl1_i386.deb Size: 29596 MD5sum: 44bd34e741794b864fd65c17a13b82d7 SHA1: 9ff2115fd7fdd1e20378f5079a585efa4277da4b SHA256: 4247ae7401ca1d50c04909138eb4421b453d10e77681656ba3b4100d4ac02b79 SHA512: d7e2ec4b42e1522dbd4524b48eb9b6699ef463a784f4d4660be716038da910d21a724a686c861e9cdf2c9beea9fe8272ee90ab4575e36fc7fe42d9fc195f5377 Description: create and open/map TrueCrypt-compatible volumes Tcplay is a free (BSD-licensed), pretty much fully featured (including multiple keyfiles, cipher cascades, etc) and stable TrueCrypt implementation. This implementation supports mapping (opening) both system and normal TrueCrypt volumes, as well as opening hidden volumes and opening an outer volume while protecting a hidden volume. There is also support to create volumes, including hidden volumes, etc. Homepage: https://github.com/bwalex/tc-play Package: ufsutils Priority: optional Section: utils Installed-Size: 354 Maintainer: GNU/kFreeBSD Maintainers Architecture: amd64 Version: 8.2-3 Provides: fsck-backend Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4), libedit2 (>= 2.11-20080614-1) Conflicts: hurd Filename: pool/drbl/live-ubuntu-experimental/ufsutils/ufsutils_8.2-3_amd64.deb Size: 162614 MD5sum: c62a92fb40faa7b2c1df9a4ff2b9a4ed SHA1: e3efe3adf4f83684c385d5e08db4004a01efcfcb SHA256: 362ee4fe9cfd9e897f9169e110aa689075dcb296d2f7e2220c79570b8bacb3cb SHA512: 075595b50be01f01d2f5bf89f67f7ddb32394ea9ed9f7dd85bf3113027ca0f854ca3540859377d997433f7d2a5efca3f75b08ec998cd00964a62c4f67f182ead Description: UFS filesystems utilities Utilities to manage the UFS filesystem, mostly used in BSD or derived operating systems. This include FFS, UFS and UFS2. . The following utilities are provided: * mkfs.ufs * fsck.ufs * fsdb.ufs * dumpfs.ufs * growfs.ufs * tunefs.ufs * badsect.ufs * ffsinfo Package: ufsutils Priority: optional Section: utils Installed-Size: 375 Maintainer: GNU/kFreeBSD Maintainers Architecture: i386 Version: 8.2-3 Provides: fsck-backend Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4), libedit2 (>= 2.11-20080614-1) Conflicts: hurd Filename: pool/drbl/live-ubuntu-experimental/ufsutils/ufsutils_8.2-3_i386.deb Size: 169058 MD5sum: f7cc51186b807114a4dad36942d138c6 SHA1: 96bdc9a9ee933716290adcf7954535c9261c3d6a SHA256: 3e6c87572bf5ee8aaccb8813c12cdfe592146311dc4018fd1c8d33d0ce17b2cf SHA512: 0a6b5f8140309b45cd9c0e87ad301366b83ffda04973f4846e9a436f09c90a925b67d503aba6c2c425f999ed3a4d919b4f6c808178b816dc2e4b7cc11fe8cad4 Description: UFS filesystems utilities Utilities to manage the UFS filesystem, mostly used in BSD or derived operating systems. This include FFS, UFS and UFS2. . The following utilities are provided: * mkfs.ufs * fsck.ufs * fsdb.ufs * dumpfs.ufs * growfs.ufs * tunefs.ufs * badsect.ufs * ffsinfo Package: kexec-tools Priority: optional Section: admin Installed-Size: 312 Maintainer: Ubuntu Core Developers Original-Maintainer: Khalid Aziz Architecture: i386 Version: 1:2.0.1-2ubuntu1-1drbl Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, debconf, initramfs-tools Filename: pool/drbl/live-ubuntu-experimental/kexec-tools/kexec-tools_2.0.1-2ubuntu1-1drbl_i386.deb Size: 77668 MD5sum: b758e263f27deea9acd3af4ffcc73629 SHA1: a26e7cf9a5eae5da38aecbbbe240c1104b65a841 SHA256: dd4293340a686a0548e484ad6ad53b45e4b980f56beac8dd91ae0341b90183d2 SHA512: 7419f2543d598d602a58b49829c82d62fdf5d64ef032e2a05520226574d91665e950b5b0c01c05915c82c215cb8d43c2649e1ed3925efae68485579d1c6f9246 Description: kexec tool for kexec reboots This tool is used to load a kernel in memory and reboot into the kernel loaded in memory using the kexec system call. Package: ezio Priority: optional Section: utils Installed-Size: 221 Maintainer: Steven Shiau Architecture: i386 Version: 20170401-drbl1 Depends: libboost-chrono1.62.0, libboost-random1.62.0, libboost-system1.62.0, libc6 (>= 2.3.6-6~), libgcc1 (>= 1:3.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2), libtorrent-rasterbar9 (>= 1.1.1) Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio_20170401-drbl1_i386.deb Size: 60772 MD5sum: f75c7e2e54f0243e49816ae0e3657dd0 SHA1: f8ed04599f62e5d19a0f900d98fdafd995ec70ba SHA256: 47f90608af345ad8fdf34c497a3a914b0e51ce097fdc9b6de6e0b9c33b28cb80 SHA512: f94788bc1274723a39d021aed765d49939e590b72d2aec1ab6fff6f1745507386b11247875e0125fbe68ed2950fd6fdb152b91cbdb00ad547716a3cc574ca92b Description: Bittorrent-based Disk Cloner Ezio is a Bittorrent-based Disk Cloner. It's heavily under development. Do not try it unless you know what you are doing. Homepage: https://github.com/tjjh89017/ezio.git Package: ezio-dbg Priority: optional Section: utils Installed-Size: 656 Maintainer: Steven Shiau Architecture: amd64 Source: ezio Version: 20170401-drbl1 Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-dbg_20170401-drbl1_amd64.deb Size: 463692 MD5sum: 75206b0a27bfcbf76f9238716e5b05d7 SHA1: aac0c2665862038b396048904807cd18a4403773 SHA256: 7971cd869e99100f21321046783353882990a7b9a856099c71c8b2b93a68faa1 SHA512: 56be09945a0eded2ddadfd2da08ff97007562277c53bbefcf8d375ae557bcb32ab2ba1cb353edafcc12704d7ebe178ef9d3cae45bcec6a75508703b865b056ad Description: Bittorrent-based Disk Cloner Ezio is a Bittorrent-based Disk Cloner. It's heavily under development. Do not try it unless you know what you are doing. Homepage: https://github.com/tjjh89017/ezio.git Build-Ids: dbc0c780357fe438ea3fb485f89aa1ad4217200f Package: ezio-dbg Priority: optional Section: utils Installed-Size: 640 Maintainer: Steven Shiau Architecture: i386 Source: ezio Version: 20170401-drbl1 Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-dbg_20170401-drbl1_i386.deb Size: 464518 MD5sum: 21a7e9a0d8bd9136412dc9d0a21fddf0 SHA1: 3df863ccb50b326ebf3245f43f9620b4daa05bce SHA256: 70d362c50ed06a4868d02cfedac36392c8e29e6440c1cc884dfd80189410900c SHA512: f65d107f3b608a2182a40a697d0acc4b1d20a5931545f8286100e9b9d44c5f1821e3b2efaee3b5af484ad03c6ca1b1721b618129d929a3d667291b1aff059cf6 Description: Bittorrent-based Disk Cloner Ezio is a Bittorrent-based Disk Cloner. It's heavily under development. Do not try it unless you know what you are doing. Homepage: https://github.com/tjjh89017/ezio.git Build-Ids: fea92c6cf5128aaa79df0cfeda0c2630d5cec06c Package: ezio-static Priority: optional Section: utils Installed-Size: 7980 Maintainer: Steven Shiau Architecture: i386 Source: ezio Version: 20170401-drbl1 Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-static_20170401-drbl1_i386.deb Size: 2740786 MD5sum: e092850eaa12d9314364479f5c0fecea SHA1: 9f76f2c0dd4964a4dc48500e91852e340867a74e SHA256: 43934267f8d4729808da63e07dcc2c4f4b259053f2dff9dcbcf014de522993ed SHA512: 826e27f0c4ae6277db791d2c63707005e71276eb78b767e5784eccfbe39f8d502eaefa8c14332d9cbb94cf52daea4ddbf7b1d08b42f9bc019092d426245c714f Description: Standalone bittorrent-based Disk Cloner Ezio-static is a standalone bittorrent-based Disk Cloner. It's heavily under development. Do not try it unless you know what you are doing. Homepage: https://github.com/tjjh89017/ezio.git Package: ezio-static Priority: optional Section: utils Installed-Size: 7667 Maintainer: Steven Shiau Architecture: amd64 Source: ezio Version: 20170401-drbl1 Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-static_20170401-drbl1_amd64.deb Size: 2570600 MD5sum: db4cb766fea4060d3c3f51320682363f SHA1: 5634f0e8eb061b13ad322e2e96e7d3703b4d9a87 SHA256: 74c29425b7ab3b06deec79c25fce7f10724c9fbc8ea30a3bc9597abeb27febc2 SHA512: 3e7f577fc5f7bcdc0b6459f3876e822a083e6bcbc0ed86aeca95b698e37df1d1080a6c7d2ce2f3b28885fe85b491755e9883937af5fe2de4588428b8cc0b2b0c Description: Standalone bittorrent-based Disk Cloner Ezio-static is a standalone bittorrent-based Disk Cloner. It's heavily under development. Do not try it unless you know what you are doing. Homepage: https://github.com/tjjh89017/ezio.git Package: ezio Priority: optional Section: utils Installed-Size: 230 Maintainer: Steven Shiau Architecture: amd64 Version: 20170401-drbl1 Depends: libboost-chrono1.62.0, libboost-random1.62.0, libboost-system1.62.0, libc6 (>= 2.14), libgcc1 (>= 1:3.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2), libtorrent-rasterbar9 (>= 1.1.1) Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio_20170401-drbl1_amd64.deb Size: 53990 MD5sum: 5dde17fb6468f63fc7e5be984189fb72 SHA1: 20b386cce832f8aaac5187ab5622e64e3cfd2bf7 SHA256: f632882374c414f5393c5ea68211691a5d958c20b223a1b31ac072e517666997 SHA512: eb54a886a9be0caba047d6da080e540c79c2621ab7d9319fb6035c141d1ed15b73212f446a40d6c59be287820d1c94396fe296d69527d81ef73e94f4e3c7aaf0 Description: Bittorrent-based Disk Cloner Ezio is a Bittorrent-based Disk Cloner. It's heavily under development. Do not try it unless you know what you are doing. Homepage: https://github.com/tjjh89017/ezio.git Package: dnsmasq-base Priority: optional Section: net Installed-Size: 879 Maintainer: Simon Kelley Architecture: amd64 Source: dnsmasq Version: 2.77-1.drbl1 Replaces: dnsmasq (<< 2.63-1~) Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-1.drbl1_amd64.deb Size: 425016 MD5sum: 0a77cd63ddee436e8e8440b64069de17 SHA1: e4d258a285d63f0138294d03de4656591e6ab07b SHA256: a6fc6aa7d0fe47b33c9170467e6491e444a5d3ee7b2a269584da7b793a98f917 SHA512: ae8e1368a0565224f997823b9d9a6ade8bfa7ac8a0f894fd409e73c577af7951a9bc6140762d9265df1a45c8d573546af3895f7643e8c20c738d8c3bf9b269ad Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Package: dnsmasq-base Priority: optional Section: net Installed-Size: 869 Maintainer: Simon Kelley Architecture: amd64 Source: dnsmasq (2.76-5) Version: 2.76-5+b1 Replaces: dnsmasq (<< 2.63-1~) Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.76-5+b1_amd64.deb Size: 420600 MD5sum: 70120ace909f9762925d898c1dc26ca6 SHA1: 7f0cb8d881b5fa09f8e22824e49d0da7791b1a7a SHA256: 4679bb6044952d223d4fb7b246b5cf333d89e26cef13e02825c87774c617e01c SHA512: db3bbd160d331d8f78a067d4f1140b79b3679aa4a5099a8d93e41af079f1b9f4a2480626bc5883adac2b0bac2511732ae554c2dfe428f9085341e72ec90fbc98 Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Package: dnsmasq-utils Priority: optional Section: net Installed-Size: 61 Maintainer: Simon Kelley Architecture: amd64 Source: dnsmasq Version: 2.77-1.drbl1 Depends: libc6 (>= 2.14) Conflicts: dnsmasq (<< 2.40) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-1.drbl1_amd64.deb Size: 23672 MD5sum: d2b8a553aaa2943278e1c00603b55fb0 SHA1: 234adb8030b5a6e7dcf358901aaa468b3d2155b3 SHA256: 36bb4c39f733e8e7255366e512edddb2539724f26a68d65058e9764d6a709137 SHA512: d7ef38c8256ff1bb3df6bf1a875e286a4ee5baa3fec1b81b8553d2b2952213a61eff82a94f86465b3502baf636f075b285eb80d4713d377f9cb1f7afb9c9bf4f Description: Utilities for manipulating DHCP leases Small utilities to query a DHCP server's lease database and remove leases from it. These programs are distributed with dnsmasq and may not work correctly with other DHCP servers. Package: dnsmasq-base Priority: optional Section: net Installed-Size: 898 Maintainer: Simon Kelley Architecture: i386 Source: dnsmasq (2.76-5) Version: 2.76-5+b1 Replaces: dnsmasq (<< 2.63-1~) Depends: adduser, libc6 (>= 2.11), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.76-5+b1_i386.deb Size: 428480 MD5sum: 1ef153e96d0bc34fa62344c22a761491 SHA1: 4e67161a17623e087efe05387fc378bf3ba44ad5 SHA256: fc0aa644126499b0133aac0ed752bc286cee630095f62caf31375b9fbe8282bc SHA512: bde53f5e928a89e39c9df47dfb1827b1d164c512ef738baf17ecaee258ca91a2788be3e1d6ed9f8c9e00c8899c0990438c79fdd7983a83acce454dcee89593ea Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Package: dnsmasq Priority: optional Section: net Installed-Size: 72 Maintainer: Simon Kelley Architecture: all Version: 2.77-1.drbl1 Depends: netbase, dnsmasq-base (>= 2.77-1.drbl1), init-system-helpers (>= 1.18~), lsb-base (>= 3.0-6) Suggests: resolvconf Conflicts: resolvconf (<< 1.15) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq_2.77-1.drbl1_all.deb Size: 16006 MD5sum: b65f0f4057b93f4393a25a1b392e2e3b SHA1: 8878a8c480a8acf893709eb061c3ae36d050679e SHA256: 91c0458c2655b4777b43f609820005e83b7bcf1bfdbfbb758912e4436abbceb6 SHA512: 9aed05fa7790799a7f0aa4929f2062af62328981f2932eb70dd476615931f88f2834a35fec4329367cadbd61ad803dbb705e2c8f78f189d6841e272ed3ff4a9e Description: Small caching DNS proxy and DHCP/TFTP server Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP/TFTP for network booting of diskless machines. Package: dnsmasq-utils Priority: optional Section: net Installed-Size: 90 Maintainer: Simon Kelley Architecture: amd64 Source: dnsmasq (2.76-5) Version: 2.76-5+b1 Depends: libc6 (>= 2.14) Conflicts: dnsmasq (<< 2.40) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.76-5+b1_amd64.deb Size: 33166 MD5sum: 71a4608eae00a7653195fec30c7ef885 SHA1: 94e504a75855f4b6f654377463ba152349e79434 SHA256: d4ec59eab72a96feb3d17d995ee7e03651dd7d1e616d1c8cf6228115ebba89bd SHA512: 0c7ad7e294fb51634ec6df3495747ad307e16c49f29ad443dcd44e6bfc5a1f266807025cc9a1b0be53f407cc1b7fb1054d22db60d4aea2e7a9cdd7e0bc60b8ff Description: Utilities for manipulating DHCP leases Small utilities to query a DHCP server's lease database and remove leases from it. These programs are distributed with dnsmasq and may not work correctly with other DHCP servers. Package: dnsmasq-base Priority: optional Section: net Installed-Size: 908 Maintainer: Simon Kelley Architecture: i386 Source: dnsmasq Version: 2.77-1.drbl1 Replaces: dnsmasq (<< 2.63-1~) Depends: adduser, libc6 (>= 2.11), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-1.drbl1_i386.deb Size: 432764 MD5sum: e332e06abc0f5889393913251034250c SHA1: cc8af1f936d21a56e97a46682074176b5f43b83b SHA256: 03e03302cfd781a0f717fda98cec4309112211a3dc9907e871b9ab550cb7d42d SHA512: c1845b8f8588ddc7dcf0f9c76df626eb0fcc213474327fd6e28c35bf0972ce87f7c756a10cf89ecab623be90ae05923f444f04218545465f6fa023a4269aad42 Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Package: dnsmasq-utils Priority: optional Section: net Installed-Size: 56 Maintainer: Simon Kelley Architecture: i386 Source: dnsmasq Version: 2.77-1.drbl1 Depends: libc6 (>= 2.4) Conflicts: dnsmasq (<< 2.40) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-1.drbl1_i386.deb Size: 24196 MD5sum: a73ca85970062ef7308ddad72aafd024 SHA1: 8bfa9211f53ea5b4074a10ba483047511a1e842c SHA256: b32e91ecd76eb2627c2c5d9e429c646b9ce08cb3c7e1f47e52cc97a0868e45d1 SHA512: 67eeae54ae6abd79a09058396a816133cd4883cff5163c62fbed8541c6f72be7be66a6ace8bb361f4f931d2b580bb04dbfac538c058ce6088e20fc7e7f009944 Description: Utilities for manipulating DHCP leases Small utilities to query a DHCP server's lease database and remove leases from it. These programs are distributed with dnsmasq and may not work correctly with other DHCP servers. Package: dnsmasq-utils Priority: optional Section: net Installed-Size: 78 Maintainer: Simon Kelley Architecture: i386 Source: dnsmasq (2.76-5) Version: 2.76-5+b1 Depends: libc6 (>= 2.4) Conflicts: dnsmasq (<< 2.40) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.76-5+b1_i386.deb Size: 33086 MD5sum: 4faac22ec9f1d166f32ca099fdc57539 SHA1: 5dd95da5fa3c91595cb7ca85ac1b3c938fee640c SHA256: 770be8b58933455faba6cb7ee9843649e1b0991e6cd678688ba287e9ed0f6685 SHA512: 5444123764cdd1cae637fe277b763ee49bee6569c46177ff19e7f21c627b14f28334e637e9ee65762c5e150ede5558bafc4e9f812f0d30151ab43a546c182462 Description: Utilities for manipulating DHCP leases Small utilities to query a DHCP server's lease database and remove leases from it. These programs are distributed with dnsmasq and may not work correctly with other DHCP servers. Package: dnsmasq-base Priority: optional Section: net Installed-Size: 880 Maintainer: Simon Kelley Architecture: amd64 Source: dnsmasq Version: 2.77-2.drbl1 Replaces: dnsmasq (<< 2.63-1~) Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-2.drbl1_amd64.deb Size: 425008 MD5sum: df8217b550761b85383b54cd8735e319 SHA1: e0b94fc0ea74673943591f58a35e715981aec5d5 SHA256: fd887d8e342abc8a25f2ff37a1add04967e193aebaf39bba3975c80884e6ee3c SHA512: 631cf796a068bc4728206fdf0b32dd6f4fabfb382968a7307aec470ea61a582c4d3e7b469156fa654074d0d871e8a96c6bc319aef1aa8f77a10c092aee1c74f1 Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Package: dnsmasq-utils Priority: optional Section: net Installed-Size: 62 Maintainer: Simon Kelley Architecture: amd64 Source: dnsmasq Version: 2.77-2.drbl1 Depends: libc6 (>= 2.14) Conflicts: dnsmasq (<< 2.40) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-2.drbl1_amd64.deb Size: 23706 MD5sum: 56c39630974d6d5f2e3c9568112e0c20 SHA1: 8afb6588bf7bb52b641b0a39d073a7918363634f SHA256: fee9d7b764cebe24ae8480e1bf8e6e3fd113f63211ad591b95038edc031a03f5 SHA512: 2615da651ea80de6c69a76b29088d541549dcc43f1308960d1d1ea7db8a41f746777fc8d232abe7d6575c5bace5a96d2f3f49da7ac97ac3907e6e9916e9ef34a Description: Utilities for manipulating DHCP leases Small utilities to query a DHCP server's lease database and remove leases from it. These programs are distributed with dnsmasq and may not work correctly with other DHCP servers. Package: dnsmasq Priority: optional Section: net Installed-Size: 71 Maintainer: Simon Kelley Architecture: all Version: 2.76-5 Depends: netbase, dnsmasq-base (>= 2.76-5), init-system-helpers (>= 1.18~) Suggests: resolvconf Conflicts: resolvconf (<< 1.15) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq_2.76-5_all.deb Size: 15944 MD5sum: ef1d61b77232b16993b6ee8ca27d14e1 SHA1: d210d57b6f32a7ac4d63513024a2777e5c732c65 SHA256: 7f347b2eb0af66227e78cd77a17fc0a047c49ec210958c17886507ad17ac174e SHA512: f21ff8722a2f758d2d77072149df19a5396b8d3f856ad1896dd6b62f36334a7e85b9379774c13821ec69162c54fd2f938c430e41117ff03cf4e23a8373e5b97a Description: Small caching DNS proxy and DHCP/TFTP server Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP/TFTP for network booting of diskless machines. Package: dnsmasq Priority: optional Section: net Installed-Size: 72 Maintainer: Simon Kelley Architecture: all Version: 2.77-2.drbl1 Depends: netbase, dnsmasq-base (>= 2.77-2.drbl1), init-system-helpers (>= 1.18~), lsb-base (>= 3.0-6) Suggests: resolvconf Conflicts: resolvconf (<< 1.15) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq_2.77-2.drbl1_all.deb Size: 16034 MD5sum: 43ee9a8350a53d5fa78178b5eaa3f9a9 SHA1: c9782042ef93bc9430d2a0259526296b6ada293e SHA256: 60bce0dd107fe72825cf1e656ec51fd6442043f55838dafe01ee7ebf83a6df3e SHA512: 449a2f0f4c4cbf6a184a6b240f38a247f0b0899f0936c852dab44c30a7bc9e7f0c80f8ba83de94e2fa2f810d0b0b6b62f9d4f7eb666fd80413d89217175d6aac Description: Small caching DNS proxy and DHCP/TFTP server Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP/TFTP for network booting of diskless machines. Package: dnsmasq-base Priority: optional Section: net Installed-Size: 909 Maintainer: Simon Kelley Architecture: i386 Source: dnsmasq Version: 2.77-2.drbl1 Replaces: dnsmasq (<< 2.63-1~) Depends: adduser, libc6 (>= 2.11), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0 Recommends: dns-root-data Breaks: dnsmasq (<< 2.63-1~) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-2.drbl1_i386.deb Size: 432820 MD5sum: 8f5e15eaae823e755fd09d157b5f9b79 SHA1: 4d039aece8e4c9ea07e10d1219e4f88cadcfcd47 SHA256: c0c3a7ad425d00af143b6eca2b90a1ad76dbc585bcfe636b0305f5038ed32c7b SHA512: bd0edb3d86191fe62539ad2bdd8114fed4fbd76998d32accedfde0cdcda2692768b251553b0ac70952ea8423e8f4aceb157a4ff36f05872740691c676c8da0c7 Description: Small caching DNS proxy and DHCP/TFTP server This package contains the dnsmasq executable and documentation, but not the infrastructure required to run it as a system daemon. For that, install the dnsmasq package. Package: dnsmasq-utils Priority: optional Section: net Installed-Size: 57 Maintainer: Simon Kelley Architecture: i386 Source: dnsmasq Version: 2.77-2.drbl1 Depends: libc6 (>= 2.4) Conflicts: dnsmasq (<< 2.40) Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-2.drbl1_i386.deb Size: 24222 MD5sum: e91d55cb0aaa17de7f4a2723a58c8044 SHA1: 7132db9c72a09391e87b78e8d55faa7cc28b1990 SHA256: e9648c47bfcbec5670914f9db5776d6760ac3e1d495ea24c591d9c3b103fc357 SHA512: f05da19dc6f93125d3ebb1ebc4de7bacb13eb31142ad9770b3692464fc1265a44e9402bfbbe3a6a2fd83f279754f40186c77ba8aa9d5ee43ebdd3cc3be2fc350 Description: Utilities for manipulating DHCP leases Small utilities to query a DHCP server's lease database and remove leases from it. These programs are distributed with dnsmasq and may not work correctly with other DHCP servers. Package: casync Priority: optional Section: utils Installed-Size: 394 Maintainer: Ubuntu Developers Original-Maintainer: Debian systemd Maintainers Architecture: amd64 Version: 1+92-1 Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libcurl3-gnutls (>= 7.16.2), libfuse2 (>= 2.6), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.0) Filename: pool/drbl/live-ubuntu-experimental/casync/casync_1+92-1_amd64.deb Size: 130912 MD5sum: 0ee1e071738b2f5fee8e1de4a9c65ef3 SHA1: bf013c35775bdab5c369bc23f6e451f737dc43f4 SHA256: 6f9c28767fdd2eca74d860d7626429f5afc4967660273f2f666d057bd518d939 SHA512: cb63bd2a8ff68f657a1000cd6317b39bbf4568ada0e279152a7a7eea337ee368ceea6269b05072ac5bda42a7022f848c6741ade76c56b290b8e6c1a374dce046 Description: content addressable data synchronizer casync is . 1. A combination of the rsync algorithm and content-addressable storage 2. An efficient way to store and retrieve multiple related versions of large file systems or directory trees 3. An efficient way to deliver and update OS and container images over the Internet 4. An efficient backup system . casync uses well-known concepts implemented in a variety of other projects (primarily git and rsync), and puts them together in a moderately new, nice way. Homepage: https://github.com/systemd/casync Package: casync Priority: optional Section: utils Installed-Size: 448 Maintainer: Ubuntu Developers Original-Maintainer: Debian systemd Maintainers Architecture: i386 Version: 1+92-1 Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libcurl3-gnutls (>= 7.16.2), libfuse2 (>= 2.6), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.0) Filename: pool/drbl/live-ubuntu-experimental/casync/casync_1+92-1_i386.deb Size: 149696 MD5sum: 268321eec80974a0d009252c68787113 SHA1: 7589280f0125bc88eb973c3879e8573fe395eb9d SHA256: e037be476d78cc1f38d46b4c6c0a2a5dbb40eb799a76665abbf4fb9138633760 SHA512: 02e5d21d86d682c2bc82cfa33e469dd10b0ccffd9efe1c79ff1ec96b7385a638ca957dd88a3b4a0c986d47f2e29df7ddee29af41222d623e7163192d3a853f6d Description: content addressable data synchronizer casync is . 1. A combination of the rsync algorithm and content-addressable storage 2. An efficient way to store and retrieve multiple related versions of large file systems or directory trees 3. An efficient way to deliver and update OS and container images over the Internet 4. An efficient backup system . casync uses well-known concepts implemented in a variety of other projects (primarily git and rsync), and puts them together in a moderately new, nice way. Homepage: https://github.com/systemd/casync